Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Boost issue

+ Reply To Thread
Posts: 11-15 of 15
2015-09-24 13:35:09
#11
Are you on MAP? I have a quite similar tune I could share with you, STI 550cc, SR20VET, T25, 3bar fuel pressure, Walbro 255

And yes, you're not gonna see boost on partial-low throttle.
2015-09-24 14:43:41
#12
Originally Posted by Dala
Are you on MAP? I have a quite similar tune I could share with you, STI 550cc, SR20VET, T25, 3bar fuel pressure, Walbro 255

And yes, you're not gonna see boost on partial-low throttle.


Sorry forgot to put that in my description, I'm running a z32 maf (draw through). Yea im pretty sure it's just the tune at this point. I have a tendency to over think things sometimes. Lol
2015-09-24 15:27:44
#13
Just talked to john, The afr offset can only be changed +or- 2.5. That explains why it would not save for me. He's almost certain it's a grounding issue with my wideband. Gonna reground my wideband to the ecu ground and hopefully that does the trick!
2015-09-24 18:06:59
#14
Originally Posted by DaveM
Just talked to john, The afr offset can only be changed +or- 2.5. ...


Limits like this should be listed in the help section! @JKTUNING , there's an improvement proposal
2015-09-25 12:52:44
#15
Originally Posted by Dala
Originally Posted by DaveM
Just talked to john, The afr offset can only be changed +or- 2.5. ...


Limits like this should be listed in the help section! @JKTUNING , there's an improvement proposal


Noted. The AFR offset should really never be any more than 1 AFR off in either direction.. optimally it should be under +/- .5.

This is definitely either a ECU ground offset issue or the wrong conversion being used. More than likely the ground offset though since that is super super common!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top