Kyle's Likes Given

Just hit 14,000 miles on the rebuilt RE4F03B, and all those miles are at 14psi. Also have 1k on the new motor now. The car has never run better. Depending on the street temperature it can hardly ke...

The sample we made was for the B13, and had valving for 9K/7K. As we use digressive valving with specialised shims (not your typical linear valving), this increases the spring rate range to within ...

A few pics of the last batch taking shape

http://turbofx.net/wp-content/uploads/2016/10/Weld-clean.jpg

http://turbofx.net/wp-content/uploads/2016/10/Weld-prep.jpg

http://turbofx.net/wp-co...

New member

2 months to get the 4 door ready! I'm in!

I've never owned one hence I contrasted the situation with my white k1's

I currently own a white NX and a black SE-R, paint condition about the same for both of them, with both of them experiencing the same environment (rain and dust-wise) for the majority of the time. ...

Took it to my local meet had a great time! With the homies [url= URL=http://s592.photobucket.com/user/ztunedsr20/media/Mobile%20Uploads/20161022_015456_zpsplz0djxq.jpg.html][img]http://i592.photobu...

Thanks. I don't have any yet but will get some up shortly.

They tried to total my NX also with some ridiculously low number but I would not accept it. I mentioned it's classic status in 2017 and challenged them to find an NX in this good of condition anyw...

https://scontent-mia1-1.xx.fbcdn.net/v/t1.0-9/14670723_1473063609373630_8206383896982032548_n.jpg?oh=a71094b313b4094740ee9e7405ec6a8d&oe=5892698B

Got a 4-wheel alignment this morning. Car drives nice and straight and steering wheel is centered. MUCH better.

Branden
aka hawaiiaNX

Tracked down a coolant leak today. It ended up being the hose clamp by the thermostat housing. I neglected to fix it for a year. Lol.

My new to me Z33 has commanded a lot of my attention in the la...

If you do the head I would also suggest using the high volume VE oil pump and matching balancer. Only the P11 VE cams are going to work on DE/RR bottom end swaps. If you want N1 cams you will need ...

What are your end goals, what will your setup consist of?

Please understand that you will have to do your own research as folks around here will not hold your hand and walk you down the road.

...

Update (10/16/16):

Replaced Passenger side axle. Attempted to replace driver's side axle, but didn't realize my one good axle was a non-LSD unit. My spare LSD axle had ripped boots, so will be r...

Was too dark by the time I took some pics, so they didn't come out very well. I'll get some next early trip to my shop. Or maybe Saturday, as the NX has an alignment first thing in the morning.

Br...

And reply was

"It should be OK up to SR16VE Cams, I wouldn't recommend using N1 cams though, unless your have valve reliefs in the pistons."

Sent from my SM-G920F using Tapatalk

Thanks Kyle I see its unlocked now .

Sent from my SM-G920F using Tapatalk

Prothane inserts on the crossmember mounts, OEM for trans and passenger. That's what I have on my daily. Tightens up the engine without being overkill.

Branden
aka hawaiiaNX

Hi there. Thanks for the note.

Obviously these are before pictures - including transmission the SR20DE will be about 150 pounds lighter, and give me about 50 extra horsepower plus fuel injectio...

Listen to this man. :bigthumbup:

Update 10/11/2016. All sets are sold. Let me know how many more sets you guys want and I'll plan on making another batch. I estimate I'll be able to work on them after the shift linkages are done w...

TX SR20-Forum 6th Annual Meet by YihShyue Liu | Photobucket

ill upload more when i get home but here are some from the Dream Speed Garage people took.

[url= URL=http://s541.photobucket.com/user/y...

Cut out a bunch of parts for these last Fri. night...next update will be this weekend.

http://turbofx.net/wp-content/uploads/2016/10/Shift-Linkage-CNC-Plasma.jpg