Kyle's Likes Given

Back in OH huh? Man I haven't been to a convention since '06. I might have to make a guest appearance in '14.

Race cars with no A/C just make clothing optional for female passengers... :cool:

(Waiting for bgreen to comment)

Besides who wants a chick that is worried about the heat? If I brought a chick ...

Fixed it for me! lol

Unplug and replug all of the connectors around the coil. You can get the no ignition signal DTC with no other symptoms/issues if the connection from the coil and power transistor to the resistor, o...

My mum works for QANTAS, I could fly Jamie over here for cheap and we'd all drop half a second down the 1/4 mile :rofl:
You interested SR20GTi-R ?
Please. Haha.

Check your ignition resistor connection.

Generally NA cars should stick around 12.6-12.8, but that's just a safe range. Run what ever AFR gives you the most power without detonation is the more correct way to go. Some setups will make m...

Thanks,guys. I have not went to get an alignment so I honestly do not know. I basically cut off 12mm on each, That does not mean that when I weld it together that i did it prefect. I will get som...

Made some top hats with offset spherical bearingto clear the 3rd member.
https://lh4.googleusercontent.com/-1bLN3vnN3pU/UgAWW0CbugI/AAAAAAAAAlw/g1cTZ53-uKg/w845-h634-no/IMG-20130803-00169.jpg
htt...

John is running his OBD2 B14 with SA, so we CAN run OBD2 with SA and a step down harness.

So I am finally finding my way back to the forum after Saturday's event.

Thank you to everyone who came out to the shop, it was so very nice to meet all of you guys finally!

We will have to m...

Some things that needs to be pointed out that i found:
-The SR20VE exhaust gasket works for the 20V header.
-The 20V header have smaller exhaust ports on the flanger than the SSAC but then if get...

Hi Guys,
I installed the header last week and i have to say that you really can feel the diference against the SSAC header. I can feel some gains from the moment the VVL kicks in untill redline. N...

Still working out details on the dates. I hope to have concrete dates soon.

MFactory lmk if you guys want it and I'll ship it out tomorrow

Yeah, seriously, it was his car... If he didn't want to sell to you, so be it. Based on what you wrote, it sounds like you may have pissed him off with your messaging.:dunno:

Sure will, hoping to get to the dyno soon. I need to find out if he has it up and running yet. The car runs and drives great, should make the trip no problem. Will need new tires by then though.

JKTUNING Thanks for hosting us at your shop and showcasing Nismotronic.
SE-RMonkey Always a pleasure. I always love seeing and I got to admire it with its classic plate all the way up to Carlis...

Just made it home a little bit ago. I had a blast and it was nice meeting you guys!

Added, thanks :)

Wish I could have been there!

Dave

First this was on a mustang dyno, Mustang dyno's are known to read about 10% lower then DynoJet's, John's dyno reads about 9% low compared to Dynojet, dynojet numbers in parentheses.

Kyle's bone s...

I am pretty sure Vadim was limited to how much psi he could run. I will let him say exactly but I think his wastegate was blowing open and couldn't boost any higher.

But yes, s13 made some pow...

Yes, baro sensor measures barometric (atmospheric) pressure and is used only when tuning with alpha-N load.

Dave

For Street Cars, Drag and Road/Race, the Helical LSD is suitable.

For Circuit Racing and Rally, the Plate type LSD is the best option.

If you have 800whp, I would go for the Helical LSD :)