All posts made by Dave_SR20 that members have liked.
So since I'm waiting on the input shaft bearing I decided to have the model redesigned. The 5th gear has a cone shape that would center the selector so I had another cuff printed to sit in place of...
What I do after I remove the 3 bolts is tap one side down so it offsets the holes and then tap it out.
What I do after I remove the 3 bolts is tap one side down so it offsets the holes and then tap it out.
Here is the quick and dirty. So far so good. I might not need spacers but I wouldn't be able to tell until I press the reverse gear and upper bearings back in but I can't just yet since my input sh...
Here is the quick and dirty. So far so good. I might not need spacers but I wouldn't be able to tell until I press the reverse gear and upper bearings back in but I can't just yet since my input sh...
Good short writeup and thank you for your contribution
Thanks Doug. 3D Part came in today. Will get it installed tomorrow.
[url= URL=http://s44.photobucket.com/user/evilempire18/media/IMG-20140107-WA0005_zps14ed6bba.jpg.html][img]http://i44.photobuck...
Here is the 1-1 3D printed cuff out of Nylon. It's rounded off to the closest MM just for simplicity purposes. This way i can make adjustments prior to getting the billet cut.
[url= URL=http://s...
So in the interest of saving time... I got it printed by a 3D printing company and should be in my hands by Wednesday 8th. This way I can install it with the reverse gear pressed back on to see the...
He should buy you beer since it came off a 10sec all motor car. Don't you know how it works yet?:rofl:
Building a Transmission Gear Cuff for the P11 2000-2002
First time using a CAD software. Just print screen everything to put it together. Everything is measured out. All we need now is to get the correct bearing that can be pressed into the shaft
[url=...
First time using a CAD software. Just print screen everything to put it together. Everything is measured out. All we need now is to get the correct bearing that can be pressed into the shaft
[url=...
Building a Transmission Gear Cuff for the P11 2000-2002
First time using a CAD software. Just print screen everything to put it together. Everything is measured out. All we need now is to get the correct bearing that can be pressed into the shaft
[url=...
Building a Transmission Gear Cuff for the P11 2000-2002
Building a Transmission Gear Cuff for the P11 2000-2002
Maybe they will give me 1 and the break! I will take anything I can get
[color= COLOR=silver]- - - Updated - - -[/color]
Remember gents the race is not over in the 1/8!
Going with the notion of guys on here have spare transmissions and can change them very easily, drag tranny with no 4th that will hold up a bit more would be a plus!
I used Honda Tech... Your number 1 source for use racing parts
I was cuttting high 1.7's on the 15" Goodyear.
Even with slicks you'll spin. You just got to know how to spin or it will fall on it's face