squirlz's Likes Received

Sure will, hoping to get to the dyno soon. I need to find out if he has it up and running yet. The car runs and drives great, should make the trip no problem. Will need new tires by then though.

Not sure how i missed this. I know i missed this years convention and i regret it, but it was bad timing with buying a new house and everything else. The car is done, just over 4K miles on it and i...

Not sure how i missed this. I know i missed this years convention and i regret it, but it was bad timing with buying a new house and everything else. The car is done, just over 4K miles on it and i...

Not sure how i missed this. I know i missed this years convention and i regret it, but it was bad timing with buying a new house and everything else. The car is done, just over 4K miles on it and i...

JWT always says keep timing at 15* with their ECUs. Too advanced will loose HP just like too little timing will. Also as others have said, a compression test will tell you a lot. If this motor was ...

Not sure if this helps, but try closing the idle adjuster on the IACV, i had a bouncing idle/recovery before, since i did that i have had no issues.

The highports came with an external coil, you can use one of those and it become straight forward.

I just finished it up installing the bushings earlier today and have the alignment close. I think there is a little toe in still but i did notice a difference in how the front end feels. During dis...

I just finished it up installing the bushings earlier today and have the alignment close. I think there is a little toe in still but i did notice a difference in how the front end feels. During dis...

I have read through sections as i needed clarification, but i should go back and read the whole thing. I love learning about this and would like to know the whole story as well. The car is running ...

If it is a controlled output of the ECU putting a jumper in there will damage the circuit when it tries to activate it. You will have 12v on one side and the ECU will try to ground the other side w...

Sweet, i was having this issue. The more i use the SA version the better it gets. There is a lot more to adjust for what i would call the setup side but it lets you get the tune right where you wan...

If something is inducing electrical noise on the communication wires than a choke would help. They are cheap enough and worth a shot. sounds like a noise issue with something.

Last year in Ohio sealed the deal for me. We are a family and there is nothing more to it. The forum goes in spurts, I usually dont visit as much in the winter as i have other things to do and the...

Last year in Ohio sealed the deal for me. We are a family and there is nothing more to it. The forum goes in spurts, I usually dont visit as much in the winter as i have other things to do and the...

They probably have not sold this many cams in years! My guess is on Monday you all get emails saying they are not available.

If anything the injectors just nee to dry and the fuel in the intake/exhaust manifolds needs to dissipate. You could always just clean the plugs with a piece of emery cloth or a fine wire brush. Le...

You have a bad ground. Clean the paint off and bolt the ground to the chassis, not the seat mount. Also make sure the ground that went to the factory battery location is still grounded well. Also c...

I sent my block to Mazworx to have them bore it out. It is one of those things that is just insurance. You could get away with it but why risk it? Also, you could have issues that are not noticeabl...

Who is going to the convention from WI?

That would be fun.

Here is more info on his setup.
http://www.sr20-forum.com/all-motor/64350-still-hope-naturally-aspirated-de-turbo-ve-world-d.html

Realistically any meter you listed will work for what you need, the cheaper it is usually the less accurate and less reliable it will be. The accuracy and quality of the Fluke is superb, it however...

I am in for sure, the G21 will be ready and making the drive. Last year was a blast, can't wait for this year when i actually have a car to bring.

I am in for sure, the G21 will be ready and making the drive. Last year was a blast, can't wait for this year when i actually have a car to bring.

Payment sent!