All posts made by squirlz that members have liked.
I have never seen a Bosch relay fail unless it is been exposed to too much current. Put a new one in and you should be fine, make sure to use a 30 relay.
The different color Nissan fuses designa...
I have never seen a Bosch relay fail unless it is been exposed to too much current. Put a new one in and you should be fine, make sure to use a 30 relay.
The different color Nissan fuses designa...
You made the right choice. I started tuning on the NEMU and it is easy to use yet there are enough features to really dial in the car to get it to run correctly. Read a lot on it and take your time...
I have about 10K on mine, daily driving in the summer. And i do not drive like a grandma, it sees red line everyday, but no extended "race" abuse. Compression and leak down tests are good. Runs str...
I have about 10K on mine, daily driving in the summer. And i do not drive like a grandma, it sees red line everyday, but no extended "race" abuse. Compression and leak down tests are good. Runs str...
Off topic but you just solved one of my issues. Thanks for the info.
You made the right choice. I started tuning on the NEMU and it is easy to use yet there are enough features to really dial in the car to get it to run correctly. Read a lot on it and take your time...
If you are keeping the mods the same from here on out a Basic will work. It might cost more to tune since it takes longer but after that you would be done. If you plan on making any changes I would...
Could you be any more vague? What did you swap? What did you not connect properly? How can you hear the starter but its not turning over?
I would have parked 2" from his drivers door just to be a dick.
I would have parked 2" from his drivers door just to be a dick.
Could you be any more vague? What did you swap? What did you not connect properly? How can you hear the starter but its not turning over?
Mid changes update.
Mustange Dyno at 237 WHP 172 Ft-LB corrected - Only the plenum and lower runners changed.
Mods:
Basic Xcessive plenum with stock VE TB
Gasket matched and smoothed lower ...
Adding info to the thread. I finally go around to tuning with my Xcessive plenum.
Before: Mustang Dyno at 220 WHP 168 Ft-LB corrected
After: Mustang Dyno at 237 WHP 172 Ft-LB corrected - Only ...
Mid changes update.
Mustange Dyno at 237 WHP 172 Ft-LB corrected - Only the plenum and lower runners changed.
Mods:
Basic Xcessive plenum with stock VE TB
Gasket matched and smoothed lower ...
Mid changes update.
Mustange Dyno at 237 WHP 172 Ft-LB corrected - Only the plenum and lower runners changed.
Mods:
Basic Xcessive plenum with stock VE TB
Gasket matched and smoothed lower ...
Adding info to the thread. I finally go around to tuning with my Xcessive plenum.
Before: Mustang Dyno at 220 WHP 168 Ft-LB corrected
After: Mustang Dyno at 237 WHP 172 Ft-LB corrected - Only ...
Did they machine the oil pump with the block?
Did they machine the oil pump with the block?
Adding info to the thread. I finally go around to tuning with my Xcessive plenum.
Before: Mustang Dyno at 220 WHP 168 Ft-LB corrected
After: Mustang Dyno at 237 WHP 172 Ft-LB corrected - Only ...
"If they build it, they will come."
That being said, there is no off the shelf, bolt on, intake manifold, period. The closest we have is the Xcessive plenum which takes some modification to make...
How are things running now?
I just installed mine and will calibrate the IAT tonight. Hoping to get some good logs in and setup my tables before winter hits. I will not have a MAF come summer. I...
How are things running now?
I just installed mine and will calibrate the IAT tonight. Hoping to get some good logs in and setup my tables before winter hits. I will not have a MAF come summer. I...
Most likely the fastest VE is not on this forum. But i do have the fastest toaster.