karibah's Likes Received

Car is running but there are a few things that need to be addressed.

Here is a pic of a test pass: [url= URL=https://vimeo.com/231628002]https://vimeo.com/231628002[/url]

Update

[url= URL=https://vimeo.com/223422852]Hunting season has begun...[/url]

Update

[url= URL=https://vimeo.com/223422852]Hunting season has begun...[/url]

I figured as much he'd be :bigthumbup:

[color= COLOR=silver]- - - Updated - - -[/color]

Update

Control panel
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/B13%20Project%20Proge...

UPDATE

Battery disconnect switch installed.
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/B13%20Project%20Progess/DSC_0001.jpg

UPDATE

Wiring being done.
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/B13%20Project%20Progess/DSC_0006.jpg

Sr20ve 20v

U13 SR20DE: Needs advice on exhaust

Haven't been updating this thread in a while.

Got the motor mounted in flush
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/B13%20Project%20Progess/IMG-20160611-WA0032.jpeg

and...

Haven't been updating this thread in a while.

Got the motor mounted in flush
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/B13%20Project%20Progess/IMG-20160611-WA0032.jpeg

and...

Did some wrenching today.

Changed the W/P and Crank pulleys
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/B13%20Project%20Progess/DSC_0075.jpg

Changed the clutch kit and flywh...

Look who arrived today:
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/IMG-20160426-WA0010.jpeg

It actually doesn't. If you take a look at the stock seat beside the Recaro; they are basically the same height. Marginal difference in height there resulting from the design of the seat - the am...

Correct you are.

[color= COLOR=silver]- - - Updated - - -[/color]



Possibly for a Altima SE-R or B15 Sentra SE-R - found it one eBay some years back.

I had a revelation and I decided to ditch the Turbo setup and go ALL MOTOR.

So I got this.....SR20VE Head fitted with N1 Cams
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/DSCF4692....

This post is about my engine rebuild

I a stickler for doing things the right way so I spared nothing when it came to buying components for my engine rebuild.

SE-R Motor Mounts for SR20 Swap
http:...

Now, I'm big on suspension so over the years I've acquired quite a bit of suspension pieces

OEM Suspension pieces
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/IMG00389-20111101-110...

Thanks Sal_JapMechanic; waiting to see that build thread of yours.

I'll help as much as I can throughout your process :bigthumbup:

Changed my injector screws to bolts from [url= URL=http://www.autotechmotoring.com/product/engine/hardware/sr20-fwd/complete-full-kit-sr20-fwd][b]Autotech Motoring[/b][/url]

http://i1082.photobu...

I had a revelation and I decided to ditch the Turbo setup and go ALL MOTOR.

So I got this.....SR20VE Head fitted with N1 Cams
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/DSCF4692....

Now, I'm big on suspension so over the years I've acquired quite a bit of suspension pieces

OEM Suspension pieces
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/IMG00389-20111101-110...

need some footage of the carnage.

I was swinging on the damn bar after i bolted it in mickey'SE-R. I can foresee that the rear is going to be extra rigid with the 19mm rear sway bar, rstb, pillar bar an floor brace.

Installed my Active Tuning RSTB from bartown
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/B13%20Project%20Progess/20140510_173153.jpg

and in doing so I had to remove the rear se...

Installed my Active Tuning RSTB from bartown
http://i1082.photobucket.com/albums/j374/karibah/B13%20Build/B13%20Project%20Progess/20140510_173153.jpg

and in doing so I had to remove the rear se...