plugs out the motor should crank over very easily. Oil in cylinders will free a motor up, I've done it on motors that have sat in the good old outdoors for long periods and are locked up. Chain i...
Pulled the bolts out of a motor mount on the first pass on 12 psi and lost 4th gear. Car went 12.075@109mph; 1.78 60'. In the 1/8th it went 7.75@94mph. Wish we would have just ran high boost on t...
Pulled the bolts out of a motor mount on the first pass on 12 psi and lost 4th gear. Car went 12.075@109mph; 1.78 60'. In the 1/8th it went 7.75@94mph. Wish we would have just ran high boost on t...
Thanks for the pointers Doug, my local welding supply is sending me fittings next time they drop off my argon, so that I can back purge. I wasn't even aware that there was .040 filler available, I...
Chris, cut the down pipe in half and ship it back. I'll put flanges on it and the right sized vband. As far as the gate, you'll just have to make that work. It's not getting into the radiator t...
As long as it isn't a ridiculous cost to ship it back I'll cover it. Lets say you have a $50 allowance on ship back and leave it at that and up front. Just make sure everything else works after y...
Chris, cut the down pipe in half and ship it back. I'll put flanges on it and the right sized vband. As far as the gate, you'll just have to make that work. It's not getting into the radiator t...
Chris, cut the down pipe in half and ship it back. I'll put flanges on it and the right sized vband. As far as the gate, you'll just have to make that work. It's not getting into the radiator t...
Chris, cut the down pipe in half and ship it back. I'll put flanges on it and the right sized vband. As far as the gate, you'll just have to make that work. It's not getting into the radiator t...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top