Jybfan04's Likes Given

John, can you post up about your tuning class?? I may come by for that!

I have had customers LOOSE power with Kelford cams.

The overlap doesn't really matter with VE, as long as you have a good turbo manifold and decent exhaust. People say P12 Cams are the better ca...

Jybfan04 In your case you would have to wire it to the ADC box, since you are still using the MAF sensor.

Wire the 5v source to the TPS's 5v power source, the ground to the ECU ground and the MAP ...

VP Methanol blend they have 3 types of Methanol M5 its the best on this grahp its a comparisson of regular Methanol and M5 and results are as advertised by VP more power!!!
Made 21whp @ 14 ft/lb of...

chuck, theres a check box in the settings that will let you AUTO save your logs ;)

Oh I haven't forgotten about your invitation

I am trying to finish up with my idle issues as well (I pretty much have a handle on it as I have the idle AFR correct, wideband (finally) working, a...

Poof
[url= URL=http://www.sr20-forum.com/driveline/]Driveline Discussion Forum[/url]
[url= URL=http://www.sr20-forum.com/driveline-tech/]Driveline Tech Section[/url] (For How To's and Information)
...

I just still can't believe that after all those attempts that pointed you in the right direction that you still missed it .. even after a phone call :p

I will revise some of the help files to make...

OK guys .. you are making things WAY over complicated here.

When I get a chance I will put something together with screen shots and maybe even a walk-through for how to do this.

(BTW: I said...

eTune service feeler

and finally could you take a detailed pic of the VE30 CAS disc?

I know in your PM you said it was the same as the RWD DET disc

...Done it... http://i1081.photobucket.com/albums/j341/peggym26/NX2000/IMG_0226.jpg It will work perfect, just have to grind and machine it down a little bit.

thanks for posting Trey2. could you use some calipers and measure the diameter of the machined section?

would be nice to just take the info to the machine shop when we do such a conversion.

also...

May I suggest you focus your thread bit more? So far you're asking for every member with a turbocharged engine to give you their build specs. That information and more is gathered in [url= URL=http...