All posts liked by Jybfan04
Great information!
Without any new information towards the case at hand, this thread will now be locked.
Basically, remember what Mama said......
https://57.media.tumblr.com/7a9220f249a717c85c9348818a4eab18/tu...
Since I dont see an end in sight for this thread and it will most likely be referenced in the future with people dealing with Jordan I wanted to put this one the record.......I'm on the complete op...
I don't **have** to...I **CHOOSE** to!
GM 3 bar Map sensors are less than $40 shipped from Ebay for an OEM version with pigtail or less than $20 shipped for a knock-off version with a pigtail.
I would recommend one of those. I bought...
Worth its weight in gold. Sometimes he gets wordy but it helped old man and I a ton.
Engine Management: Advanced Tuning: Greg Banish: 9781932494426: Amazon.com: Books
I'm not sure how this has any bearing whatsoever - working at a shop we sell parts and labor - it's foolish to think that we only make money on the labor - plus when you look at the bottom line of ...
Finally resolved my issue! Re grounded wideband and re connected to the adc box making sure both connections were solid and no excess wire showing from the adc box! I also pulled my plugs and notic...
I don't believe any forum member should be allowed to put a Mod or Admin on ignore. That is effectively negating the ability of that Mod or Admin to do their job where that forum member is concern...
This is great to read. As we said, I can only hope he distances himself from the other two cronies, as they should not be allowed or represent Jaime's last name in any regard after seeing this.
What upsets me is the fine details that are overlooked. Most of which do not need to be shared on the forum. I'm just upset that comments are made without knowing the ENTIRE story. No one knows how...
Shawn was up front with Merliss from the get go, and told them numerous time that he wanted it done properly, to a professional standard. Merliss is WELL aware that Shawn is a high maintenance guy,...
I use individual cylinder trims for fuel and ignition on my engine (AEM EMS series 1), and I swear by it.
However, I'm using mine to counter-act the tendency of cylinder 3 to run "hot", and cylinde...
I may have a set of 800cc sidefeed STI injectors and clips (with flowsheet from Witch hunter Performance).
Edit: Not for sale!
Also, S13 SR20DET Intake Manifold, TopFeed rail and SR Performance 7...
That would be cool, but seeing 10-12 forum members with 30+ total cars would keep me entertained for an hour or so. May just be me though.
Here is how the dial indicator follows the valve
http://ost.ebeans.ch/albums/userpics/10005/dial_gauge_resting_on_retainer_1.jpg
http://ost.ebeans.ch/albums/userpics/10005/dial_gauge_resting_...
On the rare occasion I'm happy to not be in the states. Over here we pay for a dyno tune. If it takes the tuner 30 mins or 2 hours to tune the cost is the same. Tuners who rush and do a $hitty ...
If you are keeping the mods the same from here on out a Basic will work. It might cost more to tune since it takes longer but after that you would be done. If you plan on making any changes I would...
Andrew being the incredibly good guy he is, objected strongly and sincerely to my offer. Didn't know if he could possibly accept. Too generous. Not necessary. Yada, yada.
Me, being the assho...
Josh used 1/4w 4.7K resistors
http://www.sr20-forum.com/nismotronic/67330-prepping-map-conversion.html
Crap, I was looking at June Not May calender :rofl:
C'mon Chris, let's just go, I'll split a room with you.
i've retired and lost interest in the Teal Monster. first $4750 (cash talks) drives the car away and takes everything SE-R related in the garage. SE-Rious pm's only plz
I got this all ironed out. Car runs like a champ.