All posts liked by Nicoxis
Be careful with used valves. Hard to know if they are truly 'straight'.
Mods please, if this is not cool, just delete them and don't ban me :poke: pretty please?
The great SR20 header test SCC Dec '99
http://i77.photobucket.com/albums/j44/1FastP11/fe0dfcfb.jp...
Nissan, You Mother Fuckers Make the Car Below An You Will Make Money Hand Over Fist
Name = 510 ( Bring Back The Icon )
Engine = 2L and 2L Turbo
Weight = 2600 pounds
HP = 220-280
Platform = RW...
It's kind of like synergy. The more other mods you have, especially when you modify the valve train, the more power you should make with a bigger exhaust. I remember seeing a '98 SE with the stoc...
Yes, the SR16 cams have slightly bigger lobes than the 20VE, say +.4mm IN and +.7mm EX. But, if you are talking about the piston valve relief depth, then no the SR16 valve relief is not deeper tha...
For those wondering what a "VVL Killer" cam looks like, here you go:
http://www.mazworx.com/pics/IMG_4719.jpg
http://www.mazworx.com/pics/IMG_4720.jpg
It comes on the TE-Vs. I think its a vibration damper/balancer. Also it could help strengthen the bulk head so it flexes less.
Its essentially a vibrations damper.
It's dead weight, get rid of it.
USDM P11's don't have them, take it out and throw it at someone. That's all it's good for, a projectile...
Noise, Vibration, Harshness reducer.
Or a nifty way to add roughly 20 lbs. to the front of the car.
I used to have a cut out but i must tell you, opening it with RPMS its a issue because the electric cut outs does not open very quick i think you should use a switch and if you need to race you jus...
[color= COLOR=Teal]i have 3" mandrel with straight thru 3" magnaflow reso and 3" dynomax round muffler. loud when you open it up but not so bad
i thought of putting on a 2.25" resonator and 2.25...
Well if you really want to compromise between sound level and HP I'd get a 2.5" -OR get a 3" with your cat intact, with a Dynoxmax drone-free muffler. They are about $75 and pretty quiet. I have ...
Nismotronic is best, the VVL outputs are priceless!!!! For NIStune, aren`t VVL outputs for now, and the price is kind of the same.....also, NIStune works with "target airfuel", not like Nismotronic...
Decided to go full racecar with the g20, cage, etc.
I have always used digital calipers. So its hard for me to gauge an exact measurement with your pictures.
These are the OEM measurements for SR16VE cams.
Intake: Low - 36.60mm High - 38.85mm
Exha...
Adding to what pTen posted.
Nico, we have all of the VE cam nose height measurements in the [url= URL=http://www.sr20-forum.com/global-stickies/57272-sr20-forum-manifesto.html]Forum Manifesto[/url...
Nicoxis, There is a reason I linked John (JKTUNING) and Dave (dfddfd2) to this thread. They know their stuff and could explain the benefits of the NEMU package better than I ever could.
As far ...
TunerCode logging is by far the best OEM logging structure available (it isn't stock consult format).
TunerCode also adds extra features like set launch (launch control), spark (ignition cut) re...
yes v6 will be an upgrade to the RT nismotronic package, as tunercode is the custom firmware that the nemu runs and nismotronic tunes :)
as for comparison imo at the minute nismotronic package has...
You could still use your current ECU with the NismoTronic package. The only thing you will need to do is solder 3 wires to the ECU pins
Found here.
NismoTronic Help - Installation
The boar...
Nico, you will need a RealTime ECU. For fine tunning, your daughterboard, you have to burn the chip over and over to get to the "final" setup.
I sold my Nismotronic Non Realtime for that reason, i ...