well in the accident the 2 fittings i added to the manifold hit the lip on the firewall an created a pretty good leak, not to mention doing a top feed rail upgrade free'd up an extra vac port, so i...
Original cable still in the '92 NX...I specifically asked. "The clutch was replaced but there was never a need to replace the cable." 230k miles and still feels great! I love finding one owner, ...
Yeah, I know lol. So I got around to fixing it today and I was right....I was able to slide it out with one finger very easily. I managed to find the seal at another auto parts store and it looke...
And an update from me, haven't forgotten or anything, just part sourcing was a PITA with the NON-LSD transmission parts. Now working with Stephen and MFactory still on a few items.
What breaks these gear boxes is wheel spin and the shock to the gearing when boost or power comes in too hard all at once. With traction and the proper boost ramp they hold up decent.
A more simple way is to weld a brace onto the motor mount/shifter bracket and bolt the other end to one of the 14mm bolts by the bottom of the oilpan. I used an old altenator bracket for this on my...
I am having fitment issues in the trans case due to the way the diff was machined. I'm taking it to my machinist tomorrow to hopefully have it fixed and complete a final test fit. I had the same is...
so a little update.... i had hoped this would of been finished today. instead a phone call to advise that my current bearings have been water damaged, and are crap, so they will need to be replaced...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top