Kyle's Likes Given

Weren't there documented fitment issues with the pretty Mazworx ones?

https://lh3.googleusercontent.com/_ufNi5b21ok_1pFF0VJrgCklzOuJTssIQlzXb9NWfJs=w1195-h672-nohttps://lh3.googleusercontent.com/BZplgpVy97QgLx_eRjEfm5cqriNn5qEQxyYHjiHlBu8=w1195-h672-no
Mark, Rodney, ...

Why didn't you just grab some cheapy auto parts 5 mm wheel spacers?? They can't be more than $20/4 and would probably save you time in itself just swapping those in.

we got Larry's track brakes on and bedded in...fluid swapped for Motul.
Changed the engine and tranny oil and spark plugs....cranked up the AGxs
removed the Nitrous bottle,and still need to remove ...

Anything under 2.5° is too low. :rofl:

Your car is fine. :bigthumbup:

I'm almost ready,, everything has come in except 1 part,.. can't wait to let'er rip... Egg in your face.. hahaha

noooo not JGY! welcome to the forum

What Did You Do To Your B13 Today?

Adjustable rear upper control and rear upper traction rods. Lower can be reused with OEM type arms and better bushings. Also get the rear subframe collars to lock the subframe to the body solidly.

eggman

3351225430597330

Installed the other wheel bearing (pass.side) on DDB. It had a single, very large pit in one spot. Also, noticed noise coming from the auto tragic tranny in D only... :*(

Header back 3" exhaust with 3" cat installed today. Quieter than the 2.25 I had on previously. Put yonaka vbands on the everything. Setup is now tri-y eBay (modified for vband) magnaflow Cali le...

Registered it for a track day at Road Atlanta. Going to be interesting to see what the LE-R can do on a "big-boy" track.

Got my fog light covers in!

http://i.imgur.com/HWMrD1E.png

93 Nissan NX2000

Thanks for the feed back yall :D I'll get my ducks in a row for the next batch of arms.

My sentiments exactly.

No rush here either but my fancy has been tickled, color me interested. B13 and POSSIBLY p10 as well

I am interested, not in a rush, I have months before I may have any real time to mess with my car.

would love trailing arms in the future

Finally got these installed. All I can say is wow. What a nice piece of kit!

I was expecting a seriously harsh ride after this because of the heim joints, but I actually think that the car feels...

I will start working on the bill of materials, contacting vendors, and figuring out pricing.



Yup, Progress coil overs setup for drag racing along with a sumped stock tank w/ an A1000 which is w...

FYI, the pictures that were originally posted in the thread that gave Viperoni the idea to make them came from Javier. I have a PM were he quoted them to me from last year January.

http://www.sr20...

woot, you didn't waste the housing or insert by using epozy!

Guide: Building Custom Koni Shorts (CSKs)