BenFenner's Likes Given

I believe that’s an NX wheel which came stock with the ADV22 brakes so there should be no issues. And I think with some caliper grinding, they should fit beneath the B13 SE-R rims too.

They are the 500 series fortune auto coilovers and the wheels are Konig Helium 15" x 6.5" 40mm offset. I happened to find a miata guy selling them with tires "used" but with zero signs of wear. I t...

I put on my Fortune Auto front coilovers, replaced my old Stillen air filter with a new K&N one, circled the Cars and Coffee then got a pic in front of the US HQ.

https://i.imgur.com/S5TDf5Y.png

Likely the 17mm. The 19mm are for wide boy 54C rods. Do you know which exact engine you have?

The mains, the block is stamped on the bottom to see which original grade they are. Adjust for wear,...

From my work desktop, nothing happens. From my phone, no problem. So, it must be this 10+ year old Vista machine I've been nursing along.

122433633111232437

your code expires on December 6, 2020!

Anyone still around ?

Back!!

Thank you so much this was exactly what i was looking for!

I think John answered this in the Nismotronic FB Group:
https://www.facebook.com/groups/145162022225980/

I'm back in the game from the IE.

Ben, since you were curious about the filter location change, I did a side-by-side of the 3 versions I've had.

I also used to have a handful of Subaru 555cc injectors that are known to fit our s...

Ben has it right.

Also don't sweat that old style pintle cap, the ones I pulled out had that kind too(likely since it rolled off the assembly line.)

The main thing is to pressure test the rai...

a little late, but thanks to everyone that showed up.., It was hella fun.. Pics are on the FB event page..
On to Numero 9 for 2020.

I've experienced this same thing, but I went further than you before I realized what was going on.

I actually tried to push start it, which bent a rod.

Your situation doesn't sound dire to me...

Sounds like a fluff piece to me! Haha jk... keep up the good work!

These pics are showing that the SR20VET manifold has unequal port spacing so that is showing that a VET manifold shouldn't been run on a DE or DET, thats all

[url= URL=https://imageshack.com/i/p...

I also compared the SR20VET manifold to that of my GTi-R and there's good reason not to use a SR20VET manifold on a SR20DE or SR20DET and the reason is unequal port spacing namely and oddly only du...

FYI cause I've heard statements made that the SR20VET was ball bearing and i'm here to tell you the at least the 14411-8H600 is not ball bearing and that's the part number tag on the above SR20VET ...

[url= URL=https://imageshack.com/i/pmhmtwSyj][img]http://imagizer.imageshack.us/v2/xq90/922/hmtwSy.jpg[/img][/url]

SR20VET Turbine 5 Bolt Flange Mod

"Highly Acceptable"

"I think everyone will learn to like it."

Famous last words haha. Looks great to me!

Stop.... Using.... Chrome.

http://www.pmslweb.com/the-blog/wp-content/uploads/2016/05/32-the-light-at-the-end-of-the-tunnel-has-been-turned-off-funny-quote.jpg