Chriscar's Likes Received

If it doesn't spin, it's a dead soldier. It's just an electric motor, with fan blades attached, and should spin freely by hand. Just make sure there's nothing physically stopping the blades from tu...

Damn those OBDII guys, I live in an OBDI world.

C

I'm going to sound like a broken record here, but instead of throwing parts at it, buy yourself a Consult cable to help diagnose the issue. You'll be able to read and reset codes, and more importan...

I've seen the outer ring separate before, but never fly off like that!! The shop ain't to blame on that one, it's just bad timing.

C

I've seen the outer ring separate before, but never fly off like that!! The shop ain't to blame on that one, it's just bad timing.

C

I'm going to sound like a broken record here, but instead of throwing parts at it, buy yourself a Consult cable to help diagnose the issue. You'll be able to read and reset codes, and more importan...

I had a change of heart at this years convention.

The last time I ran a car down the 1/4 mile was back in the late 80's with my 5.0 LX Mustang, and I had zero interest in doing it again, but wen...

I had a change of heart at this years convention.

The last time I ran a car down the 1/4 mile was back in the late 80's with my 5.0 LX Mustang, and I had zero interest in doing it again, but wen...

I had a change of heart at this years convention.

The last time I ran a car down the 1/4 mile was back in the late 80's with my 5.0 LX Mustang, and I had zero interest in doing it again, but wen...

You could epoxy 2 quarters to the top of each piston to raise compression.

C

You could epoxy 2 quarters to the top of each piston to raise compression.

C

Ok - Do a search on for all threads started by you in the Classified sections, and tell me if any need to be re-opened now.

C

Other than a few people at the convention recommending the Vibrant parts, I've done zero investigation on them. Lucky for me, I know Shawn researches the shit out of everything he buys, and he sold...

I know you're not knocking it, but let's be real, price cannot be removed from the equation. Lemme flip it around - if the drag strip was $250 to run, and the hotel was $350/night, how many people ...

How do you explain the Fleshlight ads? :poke:

C

Been hard at it since Friday. This is the final list, which was empty as of this morning. I hope I can finish up in time!

http://i432.photobucket.com/albums/qq47/chriscar2/mobile/2012-05-29231111....

Got another set, and had them cleaned and tested at Deatschwerks. They flowed between 519 & 526, so that's one more data point for these being 520cc@3bar

http://i432.photobucket.com/albums/qq47/ch...

Hey Vadim, I have a few spare distrubutors in my garage, which I think are VE. If you can tell me how to identify them, one is yours for the cost of shipping.

C

Goes to the tranny. Either reverse light switch, or neutral.

C

Your girlfriend either has the patience of a saint, or just ignores your weirdness.

C

Your girlfriend either has the patience of a saint, or just ignores your weirdness.

C

Your girlfriend either has the patience of a saint, or just ignores your weirdness.

C

Got another set, and had them cleaned and tested at Deatschwerks. They flowed between 519 & 526, so that's one more data point for these being 520cc@3bar

http://i432.photobucket.com/albums/qq47/ch...

Got another set, and had them cleaned and tested at Deatschwerks. They flowed between 519 & 526, so that's one more data point for these being 520cc@3bar

http://i432.photobucket.com/albums/qq47/ch...

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/478402_10150989839305100_1736740410_o.jpg

LMGTFY

C