calvin269's Likes Received

JDM NX

So, it has been a minute! But, finally started working on tuning it. It has been moved around a few times since coming to AZ. But now I am trying to get the engine bay cleaned up. Get it tuned ...

So, it has been a minute! But, finally started working on tuning it. It has been moved around a few times since coming to AZ. But now I am trying to get the engine bay cleaned up. Get it tuned ...

The may be a lose connection for the fuse. I had the problem on 3 of my NXs in the past. All were caused by the fuse block connection. The best solution was for me to tap into a main power going...

For anyone who wants to do this for 92, 93 NX.
You will need the controller with relay. It is mounted above the brake below the steering wheel. You will want to pull the covers to get it.
You...

For anyone who wants to do this for 92, 93 NX.
You will need the controller with relay. It is mounted above the brake below the steering wheel. You will want to pull the covers to get it.
You...

For anyone who wants to do this for 92, 93 NX.
You will need the controller with relay. It is mounted above the brake below the steering wheel. You will want to pull the covers to get it.
You...

....

Revived my coilovers yesterday. Can't wait to get these installed. Thank you.

It will last longer then any caliper paint. If you clean the parts correctly and cute it correctly.



I do all my own powder coating.

So over the weekend I tried fitting my projector fog lights. I think I have them where they will work. They take a different bracket, so I am trying to make it work.

http://i47.photobucket.co...

It will last longer then any caliper paint. If you clean the parts correctly and cute it correctly.



I do all my own powder coating.

More powder coating of calipers and rear brackets.

http://i47.photobucket.com/albums/f168/cal269/20170309_075239_zpswtc6xoud.jpg

http://i47.photobucket.com/albums/f168/cal269/20170309_075146_...

More powder coating of calipers and rear brackets.

http://i47.photobucket.com/albums/f168/cal269/20170309_075239_zpswtc6xoud.jpg

http://i47.photobucket.com/albums/f168/cal269/20170309_075146_...

So over the weekend I tried fitting my projector fog lights. I think I have them where they will work. They take a different bracket, so I am trying to make it work.

http://i47.photobucket.co...

So over the weekend I tried fitting my projector fog lights. I think I have them where they will work. They take a different bracket, so I am trying to make it work.

http://i47.photobucket.co...

So over the weekend I tried fitting my projector fog lights. I think I have them where they will work. They take a different bracket, so I am trying to make it work.

http://i47.photobucket.co...

More progress has been made!!http://i47.photobucket.com/albums/f168/cal269/20170311_135405_zpswvooetru.jpg


http://i47.photobucket.com/albums/f168/cal269/20170311_135452_zpsfjb8ykq3.jpg

http...

More powder coating of calipers and rear brackets.

http://i47.photobucket.com/albums/f168/cal269/20170309_075239_zpswtc6xoud.jpg

http://i47.photobucket.com/albums/f168/cal269/20170309_075146_...

More powder coating of calipers and rear brackets.

http://i47.photobucket.com/albums/f168/cal269/20170309_075239_zpswtc6xoud.jpg

http://i47.photobucket.com/albums/f168/cal269/20170309_075146_...

More powder coating of calipers and rear brackets.

http://i47.photobucket.com/albums/f168/cal269/20170309_075239_zpswtc6xoud.jpg

http://i47.photobucket.com/albums/f168/cal269/20170309_075146_...

I would hope you recognize your old egg!! My question is who do I have to blame for the broken bolts!! Lol 😋

Pulled the front lip off my Sapphire Blue NX. Started to get broken bolts out from where fog light brackets go.

http://i47.photobucket.com/albums/f168/cal269/20170308_194418_zpsiqat0ozh.jpg


P...

Solder it.

Looks great, I will get some pictures tonight. I will be installing it after I get the six speed in.

I will say that it looks very well done and am very excited about it.
Eric seems like a ver...