TheSam's Likes Received

http://www.nicoclub.com/FSM/Sentra/2001_Sentra/mt.pdf

Pages 51 and 52

Re: Opinions Stroke or Bore

The machine shop I would be using have an SR torque plate, they maintain a few privateers btcc sr20s so that's not a problem.

http://img.tapatalk.com/d/14/09/30/rytemage.jpg

Re: How many interested in a new high end coil over at a good price?

The only shims you should be changing are the ones under the bearing races. Install the diff as its supplied.

The only shims you should be changing are the ones under the bearing races. Install the diff as its supplied.

Re: How many interested in a new high end coil over at a good price?

Ah this is the one near Bristol isn't it?

Can't imagine an oil pump from Nissan will be cheap, an Almera gti pump will work fine.

The machine shop I would be using have an SR torque plate, they maintain a few privateers btcc sr20s so that's not a problem.

http://img.tapatalk.com/d/14/09/30/rytemage.jpg

The machine shop I would be using have an SR torque plate, they maintain a few privateers btcc sr20s so that's not a problem.

http://img.tapatalk.com/d/14/09/30/rytemage.jpg

Yup everything 2JR sell for the B15 bolts right onto the N16 over here.

Heres my N15 setup, I had them on my car since 2009 now and they are spot on, Ive used Ksport's (Way to hard, dampers fail...

Cars are not an investment at the end of the day.

Cars are not an investment at the end of the day.

Cars are not an investment at the end of the day.

Cars are not an investment at the end of the day.

Re: Are we sure regular SR20DE engines don't have piston oil squirters?

The diff units are the same in 32 and 70.

Cars are not an investment at the end of the day.

Cars are not an investment at the end of the day.

Cars are not an investment at the end of the day.

What have you read on Supertech Valves...

Its the caliper body flexing, there's not much can be done.

I've never had a cable snap in 9 years of sr20s

You are completely missing the point of the build, they weren't out for mega power, their description of how the car now, feels/reacts/drives says it all.

Wouldnt say it was a lot of work either, ...

I currently have a ported (not very well) N1 inlet and plenum on my SR22VE, Im looking at an excessive setup would using the N1 runners be preferable to ported 20ve with the excessive plenum?

It...