BenFenner's Likes Received

That is just nuts. :D

Nice!

Do you plan on addressing the 3rd gear separation problem too?

To keep costs down, the outside diameter is likely going to be the same so they can use the same chassis mounts and bushings. Nissan likes to make the bars less stiff by going with hollow bars. At ...

Is there a front bar made for a different trim level B14 that is weaker than the front bar you have now? That's what we do on the B13s to get that last bit of rotation.

If you are aggressive with the break-in it can be done in 100 miles or so. 500 miles is the typical, and I've seen some take longer. The way to really tell is if the compression numbers have stabil...

I would go at it from the bottom as well. There are chromium-plated supports on the left and right side of the intake manifold. It may be in the shape of a "V" and mount to the block down low below...

Get a 12mm box-end wrench on it, and then use the [url= URL=http://www.motoiq.com/magazine_articles/articletype/articleview/articleid/1410/wrench-tips-7--the-box-end-breaker-bar.aspx]cheater wrench...

The only few knock sensors I've ever had to remove seem like they were torqued down by the god Thor himself. The torque amount called for in the FSM is something quite light, like 22 ft·lbs or so....

I guess this sort of gives those folks who wanted it their "Like" button.

The icon design is so out of place. :D

I can tell you it appears it was not a mistake, so all is according to plan. :) I'm sure we'll hear more about it soon. I do believe there are some bugs to iron out (we don't exactly have a a prop...

I swear to God that wasn't me. :eek:

If the clutter is the only concern, I do believe that will be taken care of.
Edit: Cliff beat me to it.

That thanks button needs work for sure. I will make a better matching one.
As for the rest of it... It is still a bit obtrusive...

That thanks button needs work for sure. I will make a better matching one.
As for the rest of it... It is still a bit obtrusive...

I can tell you it appears it was not a mistake, so all is according to plan. :) I'm sure we'll hear more about it soon. I do believe there are some bugs to iron out (we don't exactly have a a prop...