1fastser's Likes Given

If you are having an issue with stalling, why not just run draw-through and recirculate?

Sent from my SM-N900V using Tapatalk

Build an Anti-Lift Kit for the P11 Today

What Did You Do To Your B13 Today?

1fastser, shady45

Not a whole lot. I started to install but found the SR20RR valve cover will not allow for the VW ignition coil in #1. I think Chris Allen was able to use them by shaving the co...

[url= URL=http://www.sr20-forum.com/members-rides/78580-jim-s-build.html#post1041253]For the first time in 16 years, I turned the ignition key...[/url]

2016 SR20 West Coast Convention @ Buttonwillow, CA

Thanks guys.I appreciate the love
I like the way the Bucktooth makes the car look more "current" I never really liked that style but it had grown on me.
The mesh one looks too aftermarket all wh...

getting "Snowflake" ready for our annual Central FL backroads cruise/meet this coming Sunday...
The car car was bogging down low,had a bad 02 sensor.Replaced it with a new one and BOOM running like...

HowTo - P10/P11 SR20VE Coil On Plug w/ 20V Crank Angle Sensor

Joined the club today.

Wasn't looking for one, but 'accidentally' came across a red 93 NX2000 near me on Craigslist, went today to look at it, and walked away a new owner.

Texas rust-free ch...

Bad-Ass B13 cover removal and inagural 2016 run

Those numbers are small in the pic.

They are Pin #'s:

Pin 1 - Coil 1
Pin 7 - Coil 2
Pin 5 - Coil 3
Pin 25 - Coil 4

The S15 coil pack harness plus that plug connector make the install ...

To be more specific:
S13 SR20 ECU

not the s13 KA ECU

Mine too. Wait til you see the next post.

I'm totally down for not letting people drive my car.. my wife don't even drive my car lol..

But in fairness maybe it would have happened anyway, or he found a weak spot.. Or something wasn't do...

first off way to much clutch for that setup

second jack the car up and look at the mount before asking if its a bad mount we cant see it

Not everyone is on Facebook, hence some may comment here if they choose.

I think it was also that Jody was pointing out that grille, fillers, and headlights are from a 1993-1994 Sentra. Not a 1991 model year as they began talking about 1991 parts. But all points are val...

Also the distributor cap is another common one for damp poor running issues. They crack over the years from the heat, and the cracks let moisture in.

It is probably your distributor cap seal. They tend to break over the years and it allows moisture inside the dizzy. This can mess up the readings of the cam angle sensor and make the car feel sl...

During my lunch break the LE-R decided to pop a fuel hose at the gas tank and dump about 4 gallons of gas from the Taco Bell drive-thru back to my work, which is about 1.5 miles away. The pressure...

Good call. I just changed the spark plugs when I slapped some cams in, I will grab some new wires soon. Thanks for the input! :) :)

Took the car cover off her, checked a few things over and got my cooling plate on! Just waiting for the salt to disappear from our roads so I can get this thing tuned and ready for summer!

[img...

What are you talking about?

There are two Conventions planned for 2016. . . . . . . .

Serban has been working on this very thing recently in the thread Kyle linked above.