On the last Dyno graph it had the 184C-IN cam it only made a couple of whp extra from 7000 to redline (Cory) I shitched to the Xcessive manifold for simplicity also for the results Pito had on it!!...
Sounds like a bad TPS. Unlug the TPS and see if the voltage goes to 0v. If it does replace the TPS. If it does not you have a short somewhere. Might as well double check the wiring while you are at...
That's actually an awesome way to make the best of a awful situation. I'm serious, it's kind of like, inspiring. Your car got jacked, the jackals took everything and left you with a shell and ins...
all wrapped up. runs/idles perfectly! then added another custom touch. :) (note to self...just like the fsm states, do not re-use intake mani gasket)
[url= URL=http://s11.photobucket.com/user/Teal9...
Here's what I came up with. I used some spare material I had left over from recovering my S13 glove box. It's black suede and worked out decent enough. I also got a little more technical with it...
x2 chappy looks awesome. I agree with Ashton on spacing the ignition away from the ecu. Ignition components create high voltage and high voltage=lots of noise. Kinda hard to diagnose as well, I'...
LAM-PARK flash89 ebinkerd thanks for the help guys. i found out what my problem was the fuse for the meters blew and i didnt know that affected the dummy light which in turn kept signal from gettin...
I like my aem ems even being a series 1. I think nemu and nismotronics are good choices as well. If your looking at anything tunable you will want to learn the software. Even if you are not going t...
Knocked the timing down from 38* to 30* at 2800rpm range. Drove 70mph max for 205 miles, with about 10 city miles. Filled up 5.95 gallons = 34.39mpg. Finally getting somewhere. Roller rockers r...