zeneffect's Likes Received

installed gauge display

http://s17.postimg.org/rg0aulhzj/image.jpg

*edit*

moved to the cubby hole, looks like it fits better there anyways.

moved, night shot. and yes, i do have access to all ...

Just be aware that realtime gauges don't react as fast as playback as it should without a little tweaking. Basically you will exploit the turbo core on the tablet by assigning nismotronic core aff...

encountered an issue yesterday with my TPS. nismotronic was detecting an "out of range" and kept kicking me into 8% throttle opening as the TPS voltage was going out of range constantly causing bu...

installed gauge display

http://s17.postimg.org/rg0aulhzj/image.jpg

*edit*

moved to the cubby hole, looks like it fits better there anyways.

moved, night shot. and yes, i do have access to all ...

replace the wiper switch. there are a bunch of copper fingers inside that will corrode over time and will short out and cause random wiper madness, or wont work at all.

Its just another ve nothing to see really

installed gauge display

http://s17.postimg.org/rg0aulhzj/image.jpg

*edit*

moved to the cubby hole, looks like it fits better there anyways.

moved, night shot. and yes, i do have access to all ...

replace the wiper switch. there are a bunch of copper fingers inside that will corrode over time and will short out and cause random wiper madness, or wont work at all.

replace the wiper switch. there are a bunch of copper fingers inside that will corrode over time and will short out and cause random wiper madness, or wont work at all.

nemu let me diagnose a faulty TPS within 10 seconds. and it did it twice, once by looking @ rpm with ignition on and foot not on gas (set launch holing 2krpm @ what is supposed to be 0% throttle o...

encountered an issue yesterday with my TPS. nismotronic was detecting an "out of range" and kept kicking me into 8% throttle opening as the TPS voltage was going out of range constantly causing bu...

nemu let me diagnose a faulty TPS within 10 seconds. and it did it twice, once by looking @ rpm with ignition on and foot not on gas (set launch holing 2krpm @ what is supposed to be 0% throttle o...

drafting a 30 day demand letter in accordance with MA law so I can pursue up to 3x the amount lost in court, including court fees, and travel. this is going to get real ugly and expensive really q...

hmmm logged in today, no response, no reply, nothing. surprised? not really.

drove it to work, uploaded a tweaked tune for better idle, got home and found this on my front doorstep.

http://s21.postimg.org/sxpfbfmuv/image.jpg

sounds like you bent a inner tie rod.

no, you want to mod the holes on the header side to mate with the cat. just copy the gasket to the flange and drill out the holes till they are slots going towards the pipe. you don't need a lift...

eggman

pre-drill out the flange that goes to the cat, and swap on a belt that moves the alternator down. if the alternator is at the top of its adjustment range, you need a shorter belt, if its i...

carbon fiber 3d printed

https://markforged.com/

the problem with shipping is you live in the boonies. its going to be hard.

www.sersuspension.net.com.netcom.dot

www.sersuspension.net.com.netcom.dot

front to back based on a measuring tape and some math

1st step 1.67 OD
2nd step 1.78 OD
3rd step 1.9 OD
1st Y 2.037 OD
2nd Y 2.54 OD

http://s7.postimg.org/guhva431n/image.jpg
http://s7.postimg.or...

http://s21.postimg.org/4mau4gcvb/image.jpg
http://s30.postimg.org/hig88pmxd/image.jpg
http://s23.postimg.org/4qoykboy3/image.jpg

http://s30.postimg.org/h89g6akld/image.jpg