All posts made by Payu that members have liked.
4 Piston Racing:: Ported Cylinder Heads
At least here they are are advertised in all sizes for $2250
I am not saying that they have to be cheap but something more affordable than $3300
TWM Individu...
Stock compression VE's I have tuned tend to like up to 34 deg with 93 octane or 32 with 91
Buy The M-Factory 4.78FD factroy B13 Trans The 6spd swap will add weight to your car and you dont need the added strength of the 6spd trans
The FD will help to keep the revs on the powerband!!!!
Car made with 88mm 300ZX pistons 209whp pretty much stock bore stock compression #'s
I made a couple of passes to get a baseline before I replaced the pistons I didnt thought that a old school pis...
I will be installing some custom CP 13:1 pistons this weekend I will post comparison pictures when I take them off!!!
Not on a budget anymore jejejeje
^^^^ 2.4L Its starting Today!!!
http://i646.photobucket.com/albums/uu185/JosePayu/Pito11secslip_zpsa8ae1dfc.jpg
The slip!!
11.87 @ 112 1.67 @60ft
Update!!! 11.93 @112.33
Firs pass on slicks
Great to see you got into the 11sec club!!
You got traps to run low 11's so more seat time and you are set!!
^^^^ 2.4L Its starting Today!!!
http://i646.photobucket.com/albums/uu185/JosePayu/Pito11secslip_zpsa8ae1dfc.jpg
The slip!!
11.87 @ 112 1.67 @60ft
Update!!! 11.93 @112.33
Firs pass on slicks
11.87 @ 112 1.67 @60ft
Yes but not so good results!!!
The pistons are not a good option if you are looking for maximum power on a 88MM Build!!!
1. They have too much piston to deck clearance (decrease compression)
2. Pi...
Yes but not so good results!!!
The pistons are not a good option if you are looking for maximum power on a 88MM Build!!!
1. They have too much piston to deck clearance (decrease compression)
2. Pi...
Adjust cam gears to +2.5 on IN and -5 on EX and you will see a bump in power and TQ that if you have Regular SR16VE non N1 cams..
88mm on a budget!! (Not on budget anymore!!!) New Dyno!!
Good write up just enough info for anyone that is interested in doing the work by itself..
230whp from a 86x86 here in PR but just one!!! and 110mph traps.... On a glutted B13 chassis
Btw traps not necessary means It gots more power since its goes hand to hand with weight too.. 215-22...
Mr Sentra Specv 233whp ITB stock bottom end Custom header SR20VE