All posts liked by wimsrules
Battery voltage should be 3.7V I think but check it will be written on battery. Did you run a verify using Emutility? Operation: Verify emulator Ram with file Do this first, if it passes then...
on your daughterboard pics, you have one of the plugs unplugged a black and purple wire, is everything plugged in? Are you doing this on the bench or in the car? The emulator will work with o...
Dala it's what he has and by no means is it obsolete or antique. Nismotronic is superior only because of its embedded code (tunercode). A version of Tunercode was written specifically for the...
Port A is supposed to be for the Consult port. You can use "Nissan Data Scan" or "EcuTalk" or any other consult I software. EcuTalk is free and doesn't require installation, can be run from flash d...
connectors are for: Digital inputs (4) High Current outputs (4) (I believe these are strictly on/off active ground and not PWM) Analog inputs(4) 0-5V may be labelled as DI, AI & HC on the connect...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top