All posts liked by mickey'SE-R
zeneffect I left the dyno at 201.09 HP and 144.63 TQ with the N1s There may have been a tiny bit more there to be had with some more tuning but the car was having temp issues. I think I need a new...
Took the car to get dynotuned,then swapped my ssac for one of the ebay tri-y for testing...and retuned.
Added N1 cams and retuned again.
Stay tuned for a full writeup and dyno sheets as soon as I...
Finally got the rear end together. Front is next then on to the good stuff!
[img][URL=http://s1342.photobucket.com/user/DaveM247/media/Mobile%20Uploads/IMG_20150222_191359_zpsa12589df.jpg.html][...
I have those measurements in this thread: http://www.sr20-forum.com/brakes-suspension/7028-b13-rear-suspension-re-assembly-problem-alignment-all-wrong-broadband-only-2.html#post115917
Read the text...
Mr SE-R we need to do a photo shoot!
http://i.imgur.com/mkeORsa.jpg
http://i.imgur.com/x88dg61.jpg
http://i.imgur.com/fnrKEHI.jpg
Today, FL weather, 72 degrees :D
http://i151.photobucket.com/albums/s126/mrserpr/24312619-817C-4418-B166-E250DB0E8433_zpsi0hggul1.jpg
http://i151.photobucket.com/albums/s126/mrserpr/6B6BA340-A324...
I havent touched mine since I parked it for the winter. Next month preps start to get it ready for the Cleveland Piston Power Show. Time to get her pretty.
Over the last few days...
Upgraded my stock fuel pump to an AEM 320(E85 compatable one) and wired it all up on a dedicated relay and larger wire.
Used a factory connector for the new wires to the r...
Just guessing that the cheaper options seem to win out over custom for the greater SR FWD crowd. I'm assuming that custom manifolds are at least $750 on the low end and $1k+ for the good stuff. Fo...
meanwhile at custom plenum creations, ariel has stepped it up to a whole new level.
[URL="http://i1334.photobucket.com/albums/w660/sss4me/billetmanifold_zps704c8447.jpg"]http://i1334.photobuck...
Im getting this intake built
http://s21.postimg.org/7frkflrrb/image.jpg
http://s21.postimg.org/rojjf2gg7/image.jpg
Then making my own ram tubes from carbon
http://s21.postimg.org/xdzrzdmmf/image...
Couple of crappy cell pics.
http://img.photobucket.com/albums/v653/trutrini/VET%20B13/20150102_224823_zps3efmhvzq.jpg
http://img.photobucket.com/albums/v653/trutrini/VET%20B13/8bfa9354-b567-4...
Every SR20 enthusiast owes this to themselves. I have said this over and over.... You have no clue what you are missing out on.
Racing, Friends, Margaritas, Devil water from Mexico and best o...
Hmmmm... Wouldn't it be interesting if a Semi transporting 5-8 cars showed up...
Got alot to do still,but shes getting there...first wash/wax since paint
http://i.imgur.com/YoNNeWJ.jpg
So I just order 3 yards of the carbon should be at my door by Saturday and I will get started
Personally I'd opt to go with a ve headswap.
The head flows alot better.
Thanks man. Good efforts and a good network of gear heads goes a long way. The best advice I will give you is to take your time.
2015 Convention will be a blast and trust me I plan on putting ...
Let's dance? :D
I know you're being sneaky!!!! I hope you make it with your car.
You know it think outside the box
Nx head liner in carbon ???????
gio94sr20ve Tuned my VE. great guy,knows his stuff and has tuned many setups,de, ve,det,VET NOS Etc