Thread: Operation SR24VVL IN PROGRESS ONCE AGAIN

i seen worse on a van someone put a brake pad on backwards and it wore all the way threw to the fans in the middle of the rotor

Ric, whens this beast coming together motor wise... what all you waitin on? I mean i

know of a couple things i wont say on here but ya know.... Go with the color from the

truck, looks real good. Nice lights and good choice on the prothanes they are almost a

must these days. Likin the build, real nice. Remember clean and simple... Wait till you get

to the see the pulsar's thread.... Good luck friend.



Chris.

That's what i love about women, they'll hear you make a sly comment 2 rooms away with the doors closed, but they won't hear the GOD AWFUL noise coming from the car everytime they touch the brake pedal unless someone says something to 'em. hehe.

i talked to Charles last week. he said the head was @ the machine shop for the valve job. but the machinist that does the work was on "vacation" or something to that effect. i'll try contacting him again today.

got word wednesday (8/11), the head work (5 angle valve grind/valve guide and seat installation) is finished at the machine shop and the head will be brought back to ASP today (8/11). all that remains should be valve train installation then install the head on the block.
contacted charles, he'll try to work it into his schedule
charles previously mentioned to me, he plans on using Greddy head bolts.

expect full color pics and spec sheets soon

subd

Damn, this is a nice build. I would LOVE to have my engine at 2.4 ltr.

Charles is alive?

^ yes but no longer with ASP anymore.

should be picking up the completed motor/b15 trans assembly this thursday.

oh. did i say yay, yet?






YAYAYAYAYAYYAYAYAYAYAYAYAYAYAYAY