Thread: heres a good one for you lot

2nd pic has 2-0
3rd pic says 1N54S

That kinda looks like a SR16 rod.

This might also help.

Those are defenatly SR16VE crank, rods and pistons.

that dosent lok like a sr16 crank.... those are sr16 rods and pistons. but the crank looks different than the one i have seen in a sr16ve

Thats a Sr16VE cranks with 8 counterweights

If you had a SR20VE crank with those rods and pistons the pistons would stick out the top of the block by 8.5mm or so.

thanks for that dre

looks like im back to the original plan of putting the head on my SR20VE block.

hmmmm i wonder if i can use the SR16 block for my VE-T build, that will save drilling and tapping the head for the GTiR bottom. i can put my GTiR internals into the SR16 block?

only thing is my 4WD transmission wont bolt up to the SR16 block will it?

i stand corrected upon close look it is a sr16ve crankshaft...