Thread: Fujitsubo Header - Collector Diameter Size?

Anyone knows the diameter of the collector for a sr20ve Fujitsubo header?

Is it 2.25" or 2.5"? Doubt it would be 3" like the other aftermarket ve headers


I've been on the Fuji site but I dont there is no English version.

Thanks

I'm pretty sure it's 60mm(2.38 inches).

I believe its 2.5 I bought mine already upgraded to a 3in collector.

Actually 60mm = 2.36". If the header is 2.36" then It would be ideal cause I am running the 60mm exhaust. If it is 2.5" then should not be a problem. Even if it 2.25" then it should be ok. As long as it is not 3" since I don't have a 3" exhaust and I wouldn't want a 3" header going into a 2.36" exhaust!

Thanks

I'll measure the Fuji on my car later, but right now it's raining outside

Confirmed!

Thanks. More tend to believe it's 60mm rather than 2.5" as the Japanese uses metric system.

Guess the thread can be closed now.

Ive asked you about Fuji diameter at your thread and you said its 3" (~76mm).

Well, I was wrong, got a little disapointed myself

Take note they do use a large flange so they can bolt up to a 3" system/suitable flange

And yeah it is 60mm.