Thread: o2 Sensor Fouled

So I think i just may have fouled my o2 sensor. I was just wondering which o2 sensors are easy replacements for a VE (soon to be ve-t). I think I remember reading about 300zx o2 sensors before. Will they work? I am using a Calum RT.

Here is a pic of mine: (Bosch Part # A24-A71 033 79110)

for an oem, the 300zx has a longer lead than the b13/b14 one which makes it easier to install in a header collector (fuji), but either will work fine. i just replaced mine with a 4 wire (ours are 3 wire) universal fit. there's a thread here somewhere on the supposed advantages of the 4 wire on cars with stainless steel exhaust systems. i've noticed no differences in my 600 miles on it so far, except now my idiot (mil) light is out. ymmv

Ok, so since I have a fuji (or at least until the turbo mani goes on) I should probably grab the 300zx sensor. Are the harnesses plug and play? Does it make a difference between VE and DE harnesses? (I'm not sure which ones on there)

the 300zx plug is the same as the 3 wire o2 sensor you removed.

ok, excellent. Thanks for the help, teal

Bosch #15727 4 wire universal replacement sensor... there's an extensive thread on that info, started by vadim...

and they're $60 bucks i think

Ok, I found this one for an NA 88 300ZX on autozone's site. Is this the correct one? The one for the turbo is 4 wires.

http://www.autozone.com/R,2366948/vehicleId,1065702/initialAction,partProductDetail/store,1895/partType,00117/shopping/partProductDetail.htm

And $40 would be great