HOW TO: Hook up E60 Maxima MAF on B13
Well I searched last night and didnt find any threads on this. So I figure Id make on. I dont have pictures but its not hard.
E60 MAF WIRES <---------------------------------->B13 HARNESS
--------------------------------------------------------------------------
1.RED -12V (Power Wire)-----------------1.ORANGE-12V (Power Wire)
--------------------------------------------------------------------------
2.BLACK -GROUND--------------------------2.WHITE-GROUND
3.WHITE -READ-----------------------------3.ORANGE-READ
--------------------------------------------------------------------------
Now heres the thing. On the B13 harness there is 2 orange wires. When you open the harness up you will see that 2 wires around wrapped with a gray sleeve leaving the 2nd orange wire (power wire) by itself. So then you know the orange wire wrapped in the sleeve with the white wire is the read wire. The maxima wires are all diffrent colors so theres no mixing up there. Hope this helps and I explained well enough.
E60 MAF WIRES <---------------------------------->B13 HARNESS
--------------------------------------------------------------------------
1.RED -12V (Power Wire)-----------------1.ORANGE-12V (Power Wire)
--------------------------------------------------------------------------
2.BLACK -GROUND--------------------------2.WHITE-GROUND
3.WHITE -READ-----------------------------3.ORANGE-READ
--------------------------------------------------------------------------
Now heres the thing. On the B13 harness there is 2 orange wires. When you open the harness up you will see that 2 wires around wrapped with a gray sleeve leaving the 2nd orange wire (power wire) by itself. So then you know the orange wire wrapped in the sleeve with the white wire is the read wire. The maxima wires are all diffrent colors so theres no mixing up there. Hope this helps and I explained well enough.
Back to top
