Thread: Blew up my fully modded VE engine

What engine? How much power? ITBs? Damn.. its awesome track car. More info about her!

Whew! Look at the size of that manifold intake thingy

I saw it happen but on a highport DE. The oil gallery was clogged, blocked oil to that section of the intake cam and snapped it. Just an idea of what to keep an eye open for... check it out.

It is a standard ETCC engine with around 270-280 BHP. The big intake is only to optimize the flow, since there is a 62mm intake limit in the TB
But I have a complete set of Jenvey Race Quad TB with everything needed for a DE. With new flange it will fit the VE and make a lot of noise or music if you want


We made a long thread about the ETCC race car a couple a years ago on sr20forum.com maybe I can find it

/Carsten

Thanx, I will have a look, but right now the engine has been put in a corner of my garage until it can behave nicely again

Really nobody who has a lot of parts they want to sell me!?!?

Updated list......
3 x W11 engines (or GTI-R engines if you can't get any W11 engines)
2 x VE engines
1 X VQ35 engine and tranny from a A34

3 x GT2871R
4 x clutch
3 x exhaust manifolds
3 x frontpipes
3 x HKS Chrono DB meters
3 x FIC
3 x Turbo Timer
3 x BOV
4 x rear exhaust
3 x Koyo Radiator
3 x oil coolers

FYI I snapped my JWT S3 intake cam so you aren't the only one to snap a cam if that is what you were referring to in your first post. It sucks

never snapped a cam before even when my motor i put together threw a rocker arm causing the valve to get bent open then the motor siezed once the carnage was over, haha those were s4's in there too, i would have been pissed to find a broken cam. S4's are not cheap,

The problem really isn't selling you parts, it's shipping motors overseas. If you had a freight forwarder over here i could work with, I'm sure we could accomplish most of this.

ouch