![](/images/threads/icons/0.png)
Hello there ! Just a quick question about the SR20VE cam solenoids...
-Sometimes i feel the VVL kick in the 4500+rpm range, sometimes i dont. Intake Solenoid test with engine off, clicks less audible than the exhaust in engine off test ( i know i should have tried at idle activating them but i was on the highway). Exhaust solenoid is working and engaging because it becomes louder in 6000rpm....
-I had a problem also with my connecting rod bearings spun after that test run.
- If my solenoids are not activated does my connecting rods getting damaged by higher oil pressure or thats just a rumor ?
Thanks !
-Sometimes i feel the VVL kick in the 4500+rpm range, sometimes i dont. Intake Solenoid test with engine off, clicks less audible than the exhaust in engine off test ( i know i should have tried at idle activating them but i was on the highway). Exhaust solenoid is working and engaging because it becomes louder in 6000rpm....
-I had a problem also with my connecting rod bearings spun after that test run.
- If my solenoids are not activated does my connecting rods getting damaged by higher oil pressure or thats just a rumor ?
Thanks !
Last edited by DrVVL
on 2024-06-28
at 02-22-55.