Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: Primera P11 = SR20ve 20v + 6Speed + 5*114

+ Reply To Thread
Posts: 21-30 of 30
2019-03-12 11:17:52
Nissan Primera P11 swap 20v first start

3 years finally running good. Ofcourse it needs some tunning but it moves by himself.
2019-03-12 11:58:54
Good stuff man!!
2019-03-12 13:48:34
Thanks!. Nothing has changed since i started the swap. Same ideas but now completed.

Here is a pic of how car looks actually.

One or two more weeks car will hit the Dyno, specting to reach the 200whp on NA configuration and no turbo plans for him.
2021-07-03 23:54:40
Well, finally able to login after so many years.

Car is currently running over Nistune ECU, have dealt with some issues with the VVL since it was a S14 ECU (from a Blacktop DET). Besides that car ran well for almost 2 years, didn't use that much since covid and staying at home. Car put 180whp without VVL.

Now have decided to go on Haltech Platinum 2000, this week work should be done and then heading to the dyno, will post numbers later this month.

2021-07-04 13:51:49
Good to hear. Looking forward to updates.
2021-07-07 12:01:18
Heck ya! Glad you are back on here, Carlos!
2021-07-14 05:19:33
Now, that's just amazing! Great choice of car, OP.
2021-11-21 22:18:06
Car is finally running on the Haltech Platinum sport 2000. Just a base map but enough to get that single VVL selenoid firing up hard at 4500 rpm. Car map was loaded with a sr20vet base map and then tuned properly for street use, need couple of stuffs before heading to the dyno.

The crank angle (don't know if i'm right with that part on specific) was set at 50 degrees, in case that anyone would need a start map/base map i'll help with mine. After i hit the dyno i can also upload the sheet and the map if anyone needs it.


2022-10-16 04:17:57
Any updates on this?
2023-05-15 00:14:42
Originally Posted by dre
Any updates on this?


Yes, the car is running now with a Haltech Platinum Sport 2000.
I have not dyno the car again, but without VVL put something like 180whp with a lot of electrical issues.

I leave a video to my instagram of the car activating VVL as i leave my parents house:

Update Your Browser | Facebook

I still need to finish some stuff on the car, most of them are related to vacuums, since the car have been without use for years.

I'll promise that in the short term, i'll post a video of the car on the dyno with all the specs. Hopefully around 210whp which is my goal.

This is not my daily drive anymore, now i own an Audi S3 which takes most of the time and money.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top