Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SR23VE FWD Build

+ Reply To Thread
Posts: 51-60 of 85
2016-03-17 19:50:46
#51
absolutely gorgeous!
2016-03-17 19:52:39
#52
Dang that is pretty.
2016-03-18 03:44:20
#53
Looks stunning!!!
2016-03-18 11:38:34
#54
Thing of beauty!
2016-03-18 22:36:42
#55
Is that a 3" front pipe? Looks like there is a TON of clearance!

Man that's a nice header. PROPS
2016-03-21 07:50:05
#56
Originally Posted by Haulin200sx
Is that a 3" front pipe? Looks like there is a TON of clearance!

Man that's a nice header. PROPS


Yes, 3"
2016-03-21 16:28:17
#57
Originally Posted by Bullit
Saturday means a day in the garage

Today I've filed all piston rings to the right clearance.
0.016 " on TOP ring and 0.020 " on second ring.







Everything ready to go inside the beast.



Dang were you cutting your rings with drill??? Or its that a fake pic? If its real any tips? What type of blade?
2016-03-21 17:12:55
#58
Looks like he's using a plain ole fiber cutting wheel CLAMPED in the vice...was probably just being lazy and didn't remove it from the drill
2016-03-21 17:25:40
#59
The vice is open so i used the cutting/grinding wheel with the drill to grind of the rings to get enough gap.
Faster than by hand.
After it was on the tight end of the scale I just took a diamond hand file a couple of drags to clean up after the grinding.
2016-03-21 17:31:00
#60
Ok cool and sorry if i missed it or didn't read it all but what type of crankshaft was used and wat made you decide on that crank?
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top