Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SR20VE 20V setup - advices?

+ Reply To Thread
Posts: 11-20 of 73
2016-02-27 02:23:33
#11
So the 20v cams vs n1 cams whats better
2016-02-27 02:53:43
#12
Depends on application
2016-02-27 02:55:00
#13
Well stock 20v engine sock manifold and a big 4.1 haeder

Sent from my SM-N920P using Tapatalk
2016-02-27 06:11:08
#14
Originally Posted by mercado
Well stock 20v engine sock manifold and a big 4.1 haeder

Sent from my SM-N920P using Tapatalk


Then I say N1's with Supertech valve springs
2016-02-27 06:53:37
#15
N1 for max power, 20v for all round awesomeness
2016-02-27 10:51:14
#16
Supertech springs but they haven't made them for 20v or not

Sent from my SM-N920P using Tapatalk
2016-02-27 11:03:27
#17
Run det supertech single springs if you want to change them, fits the same
2016-02-27 11:05:28
#18
Any brand det springs

Sent from my SM-N920P using Tapatalk
2016-02-27 11:06:30
#19
So n1 them are the cams vs the 20v

Sent from my SM-N920P using Tapatalk
2016-02-27 19:14:46
#20
use n1 cams with stock s&r
n1 are better than 20v cams
your tri y big tube is better than 20v header
xcessive plenum with 90mm tb is the Best Way to make good power with that set up

200+whp with that set up
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top