Thread: Sr20ve swap b13 Wont Start!! Heellp!!

Ive just gotten my Ve swap ready to start but it WONT. I have power at the starter but no signal from the small wire(understood that its supposed to receive a 12v signal when the ignition is turned). I was able to jump the solenoid with a screwdriver and it turns over but doesn't start. My relays are good and fuses are not blown. I have enough grounds and fuel pressure with spark. As far as it not starting by the ignition, Im thinking I made need a new ignition because of no signal being received at the starter.Any help is greatly appreciated, so much that whoever gives me the correct solution to my issue wil have their choice of a die cast gtr model, half used calvin kleain cologne or a stooped frooty iced out watch that will pull all the shortys at the club yo!. I seriously need some assistance, I want to hear my swap purr for its first time, Below are some leftover wires that I have that aren't connected and I assume I don't need any of them, but if Im wrong can someone lmk where they go, thanks for all help!!!
[img][URL=http://s1382.photobucket.com/user/calikid89b13/media/photo%202_zps1st3n2lo.jpg.html][IMG]http://i1382.photobucket.com/albums/ah266/calikid89b13/photo%202_zps1st3n2lo.jpg[/img][/URL][/IMG]
[img][URL=http://s1382.photobucket.com/user/calikid89b13/media/plug3_zpsag9kawiq.jpg.html][IMG]http://i1382.photobucket.com/albums/ah266/calikid89b13/plug3_zpsag9kawiq.jpg[/img][/URL][/IMG]
[img][URL=http://s1382.photobucket.com/user/calikid89b13/media/plug%202_zps3lamaa9v.jpg.html][IMG]http://i1382.photobucket.com/albums/ah266/calikid89b13/plug%202_zps3lamaa9v.jpg[/img][/URL][/IMG]
[img][URL=http://s1382.photobucket.com/user/calikid89b13/media/photo%201_zps8ddvjatx.jpg.html][IMG]http://i1382.photobucket.com/albums/ah266/calikid89b13/photo%201_zps8ddvjatx.jpg[/img][/URL][/IMG]
[img][URL=http://s1382.photobucket.com/user/calikid89b13/media/plug_zpsjtfpypdn.jpg.html][IMG]http://i1382.photobucket.com/albums/ah266/calikid89b13/plug_zpsjtfpypdn.jpg[/img][/URL][/IMG]
[img][URL=http://s1382.photobucket.com/user/calikid89b13/media/photo%204_zpsmudhgl1a.jpg.html][IMG]http://i1382.photobucket.com/albums/ah266/calikid89b13/photo%204_zpsmudhgl1a.jpg[/img][/URL][/IMG]
Pic #1-Wire left over by alternator harness wiring.
Pic #2-C clip plug left over by firewall, not maf
Pic #3-4 prong box plug left over that comes before injector plugs.
Pic #4-Two plugs that are right before the fuel injector plugs.
Pic #5-Two wire plug that is located after the four fuel inector plugs at the end.
Pic #6-Prizes! and I have a pic of the icy watch/....PLEASE HEELPP!!!

Picture 1 Ac compressor connection
Picture 3 plug connects to picture 5 plug

Other plugs are egr connections

yep as stated in your ten other threads Ulysses got it right. should fire right right up

Yea my b man, she fired up though took a good minute. I still cannot start it from the ignition cylinder though and Im still not getting signal at the starter when I turn the key..hmmm