Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: sr20ve into a b15 se-r spec V

+ Reply To Thread
Posts: 1-8 of 8
2014-11-01 16:47:24
sr20ve into a b15 se-r spec V
Okay, I can get a good deal on a b15 Sentra se-r spec V, blown motor. Already has the 6 speed. Now my question is, is the sr20ve swap as straight forward in a b15 that had the QR motors in as it is in any other car that had a sr20de.

Also will the 6 speed tranny be able to be used or better to find a different tranny.

I am a newb in the motor swap department, but not to much else.
2014-11-01 21:27:47
Not as easy, since with a 00-01 SE, it's pull and install.
2014-11-01 22:45:05
If you used the SR20 motor mounts from the 00-01 SE... shouldnt they work in the spec-v?
2014-11-02 10:24:01
Originally Posted by mirrortints
Not as easy, since with a 00-01 SE, it's pull and install.

This is what I thought as well. Seems easy on paper, but after thinking about it, seems a lot of parts need changed.
2014-11-02 12:10:38
I think the crossmember, mounts, engine harness are the main parts. Basically need a front clip. At that point, it's easier to just find a 00-01 SE to start.
2014-11-04 18:01:17
Why a VE, go VQ.
2014-11-04 18:44:25

with instructions that are printable no less!

VQ35 Swap Install Instructions - FI-R Write up
2014-11-05 22:20:03
In the orlando area I have seen a few spec v with bad motors sell for in the $1k range and under then you would need a bell housing and flywheel and clutch to work with the 6 speed. Mounts I havnt looked into but nothing a welder can fix.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top