Welcome to the SR20 Community Forum - The Dash.
SR20 forum logo

Thread: CAN'T START after VE swap!!

+ Reply To Thread
Posts: 1-4 of 4
2008-06-22 23:40:42
CAN'T START after VE swap!!
.. So my swap of VE into my 91 NX2000 is done, so I went to start it and crank after crank - but it wouldn't start. This is what I've done:

- Checked for the spark - took out one of the spark plug wires, connected spare spark plug to it, grounded it and checked for spark - Found spark and moved on..

- I have a fuel pressure gauge so it does show pressure of about 48psi during cranking, but it seems the injector pulse is not present - I am not sure how to test for it properly, this is what I've done: took out one plug from injector #1 and plugged in Voltmeter, during cranking did not show any voltage changes

- maybe there is a better way of testing it?? (I could open up a spark plug and smell if fuel is getting to the cylinders) Let me know

I am using Calum ECU, DE maf, DE harness (including the injector harness). What else can it be, Help would be appreciated.
2008-06-23 01:33:19
silly question but it kept my VE from starting up right away did you connect the maf? double check all other harness connections.
2008-06-23 03:57:35
did you connect the ignitor?
2008-06-23 11:55:59
It Started! Classic mistake of hooking up fuel lines in reverse.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)

    Back to top