Thread: Trying to get interest to have these Autotech Motoring Intakes made.

What i know of them:

• Machined/billet stacks
• bolts right on to VE lower runners
• better seal than Xsessive Plenum
• beefier plenum material
• polished look
• made for Q45 TB
  

Right now they made it for the RWD cars but if we get 10+ they will make it fit our cars. So how about it? Goes for about $700.

I know it's the fwd nissan community, But skunk2 has a similar design IM for hondas that has been proven to flow almost as good as itb's around the same prize with huge runners. Is it possible that there will be different lower runners in the future ? & what's the gains

Arteeste no gains since it has never been tested on a fwd car before.

Charlie I'm willing to pitch in some moneys to get this rwd plenum and make it work on fwd. Lmk.

The bolt pattern for the plenum looks symmetrical, so it could be reverse for a fwd application like the Xcessive.

I think this plenum with 26 bolts is overkill. Definitely made for big boost, plus billet = $$.

The top of this manifold lines up with the brake booster on our cars. The time they place a elbow on this it will kill the flow.

Thanx Raul. I will talk to them this week.

and.... this never happened