Thread: SR20VET what ECU to use ?

Hello !
I have bought a complet sr20vet with harness and sr20vet ecu but i want run a Nismotronic to tune it ! What can be done to get sr20vet run with Nemu board ?
Also i plan swap this sr20vet in to my Pulsar GTI-R which already have Nemu board in stock 54c00 ecu.
Is it possible to swap Pulsar wiringharness and ecu on sr20vet ? I think that big problem is to get 20V cas and coils and vvl solenoid to work with GTI-R ecu ?
Tell me what you think , what can be best solution ?

from what I understand is you need to get a S13 SR20DET harness and ecu. Rewire/loom the S13 harness....that would be the easiest route to use Nismotronic. The GTiR ECU or any other ECU doesnt have the capability to run the COP.

If you don't use the COP, you might be able to use the GTiR harness/ecu with some work. IE swap CAS out with the GTiR disty, etc

Idle stuff such as the IACV would need consideration or just crack open the TB for idle....

Contact jktuning and see what he says about your options, he are the nismotronic guru. I do my own tuning and almost never need help with this stuff but jktuning is always ready to help. I would say some of the best customer service I have ever had.

Check this thread out.