Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: DE distributor wiring to DE wiring harness for VE swap

+ Reply To Thread
Posts: 21-30 of 48
2014-06-01 06:04:25
#21
No idea, lol. THis is why I don't mess with wiring because of all the different colors. To me the "green" looks white and the white looks yellow.

Harness Orange - Distributor Red
Harness Yellow - Distributor Green
Harness Black - Distributor Black
Harness Blue - Distributor White


Did this, and it sounds closest to starting, but just wont turn over. Going to try to jump the battery at the same time tomorrow, wondering if that could be the problem since non-colorblind people confirmed this is how it was setup
2014-06-01 19:35:51
#22
blind leading the blind over there literally
2014-06-02 03:16:58
#23
dude..what color are your eyes? Did you choose them to be that color? NO. Same way I didn't choose not to see color. It sucks. 10 percent of the male population has it. What can I do?? Nothing but rely on those who can see them.

Anyways, here is my harness pulled, and they are of course, different colors:
.

.
.



At least these 4 connect as male/female and these are in the right order, now I just have to backtrack where the end of them hit the engine wiring harness
2014-06-02 04:58:30
#24
After wiring my ve for the ve dizzy and then rewired for high port ignition, best advice is get a multi meter and a length of about 10 feet of wire to extend the probe length. Then just check which wire leads back to which ecu pin.

Sent from my SM-N900V using Tapatalk
2014-06-02 05:34:49
#25
Cool thanks. What do you/anyone think about just getting him a VE dizzy from Andreas with the pigtail?
2014-06-02 06:09:33
#26
I found this pic of mine before, hard to tell though unless you guys can see the colors..

2014-06-02 06:58:32
#27
Yeah just use the ve dizzy. only reason I switched back was because the ve dizzy went bad

Sent from my SM-N900V using Tapatalk
2014-06-02 07:08:55
#28
Ok, so the VE dizzy pigtail comes with 6 wires, do they all connect straight forward to the 4 wires from the harness that have been messing with in these photos, and 2 of them not used? I have the DE distributor on my car and never messed with this stuff.
Last edited by Storm88000 on 2014-06-02 at 07-19-19.
2014-06-02 07:13:08
#29
All 6 are used. I'll look back on your posts and pics in detail tomorrow and see if I can give you a pin out

Sent from my SM-N900V using Tapatalk
2014-06-02 07:18:33
#30
You are awesome. thank you. Im reading the How To section again
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top