Thread: maxing injectors on a ve.

No not really I paid $550 installed into my b13 ecu comes data logging cord black bix for wide band and instruction in how int install on your laptop


Sent from my iPhone using Tapatalk

I would talk to john from nismotronic he's very helpful


Sent from my iPhone using Tapatalk

can anybody explain the last line? or any of it?

Lol you start from the top the cLculation take the variable put it to the next equation take that next variable and put it towards the next and so on the 12.2 I think it is is the statdRd number your useing if that makes any sense to you


Sent from my iPhone using Tapatalk

Ok never mind that 12.2 number as the standard I was thinking something else but the solution of the first equation is gonna be you variable for the second equation as the second goes to the third then from there I you look at the examples you should be able to figure it out


Sent from my iPhone using Tapatalk

So getting a duty cycle of 70 wot is that good?


Sent from my iPhone using Tapatalk

Yes 70% is fine, you are well within the effective range of your injectors. Was this (70%) calculated or logged? I'm seeing 50-60% duty cycle while I tune for more boost. Depending on your injectors you can push them to 90% duty cycle, I run msd injectors and won't run them past 85% just to be safe.

Yes I have the stock 333 injectors and for the most part that's what I was seeing 50-60 70 being the max all logged


Sent from my iPhone using Tapatalk

I'm gonn keep messing with it I'm gonna see if I put a video of the log so you can see


Sent from my iPhone using Tapatalk

Ok. Rule of thumb is not to exceed 80% duty cycle on any injector so keep that in mind for future mods.