Thread: VE chipped box

A guy is selling me this



Can i burn new bin to change to current setup?

I want to burn bin with the following setup, VE, 333inj, DE maf

yes you can burn new chips to change the bin

like contrim1 said, yes you can burn new chips for this ecu.

I have a .bin for your desired set up and a chip burner. if your interested shoot me a pm.

Or buy the ecu and buy a nemu and unplug that daughter board or nistune and plug in place.

The old program in the old chip cant be over wrtitten?

You need a burner to program the chips. https://www.moates.net/burn2-chip-programmer-p-197.html?cPath=94

Old tech man, not very fun stuff, nor the correct way to approach things unless you own a chip burner an lots of extra chips.. not to mention a wideband but thats a givin in any case.

I apologize if I sound like a dick man, I jus get tired of seeing people do swaps an not do research to find out what they will need.. I know a lot of guys will say they are on a budget.. welk if thats the case you either A live with the problems until you can get the right parts or B dont do the swap till you have the right parts..

I seriously think you should save up an buy nismotronic or at the very least a nistune or calum rt if its cheap enough to be worth it.. with nistune you habe to have a software license so beware of that...

I worded that a little off. You can reuse your old chips. they are capable of up to ~10,000 re-flashes before death. there is no warning signs so its always good to have an extra set if you plan on playing with your tune.

So this is just a waste of money. Since this one cost 255$.

Then i should stick to my de box with mss then save some for the nismotronic.

You'd spend too much time burning chips just to dial your setup in..

Save yourself the headache and just add a few more coins and get Nismotronic!

You will thank me later I promise!