Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Gspec pulleys

+ Reply To Thread
Posts: 1-10 of 19
2014-03-21 16:50:02
#1
Gspec pulleys
Hey guys I have a Ve in my b13 and the car currently only has waterpump pulley and crank pulley and alternator. no ps or ac and no delete kit .... Does anyone know what belts I need to run I can't find the size anywhere. Someone please help
2014-03-21 20:46:17
#2
If you dont want to wait for an answer....you can put a piece of rope around it and mark or measure it so you can take it to the autoparts store to match up
2014-03-21 22:05:20
#3
^^^ this

Sent from my SAMSUNG-SGH-I317 using Tapatalk
2014-03-22 01:21:17
#4
Call Greg. I ran into a similar problem, I have the G-Spec underdrive and water pump without A/C and you basically just have to get the belt that's closest in size. I also have no power steering and got his idler pulley thingy and that helped a lot. I don't know if he still has them though
2014-03-22 15:40:25
#5
Same issue here... so interested in the result here.

@Storm... is it still ok to drive daily without powered steering??? just wondering.
2014-03-22 18:33:57
#6
I'm currently running without and idler and want to continue to do so. I know I can measure the belts and throw them on was just curious to see if anyone had already done it and found a good solution
2014-03-23 07:20:11
#7
Ok fair enough. I'd pull mine out if I could get a belt that fit
2014-03-23 20:17:48
#8
Its gonna be a stretch fit belt ill get the exact number off my motor later
2014-03-24 15:44:43
#9
The belt that you need is part # 25-030250SF
2014-03-24 23:59:32
#10
It's 336-4 or 337-4 go to orallys they have the belt size you need.i went to autozone nine times and they gave me the wrong belt nine times also ...
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top