Thread: Gspec pulleys

Hey guys I have a Ve in my b13 and the car currently only has waterpump pulley and crank pulley and alternator. no ps or ac and no delete kit .... Does anyone know what belts I need to run I can't find the size anywhere. Someone please help

If you dont want to wait for an answer....you can put a piece of rope around it and mark or measure it so you can take it to the autoparts store to match up

^^^ this

Sent from my SAMSUNG-SGH-I317 using Tapatalk

Call Greg. I ran into a similar problem, I have the G-Spec underdrive and water pump without A/C and you basically just have to get the belt that's closest in size. I also have no power steering and got his idler pulley thingy and that helped a lot. I don't know if he still has them though

Same issue here... so interested in the result here.

@Storm... is it still ok to drive daily without powered steering??? just wondering.

I'm currently running without and idler and want to continue to do so. I know I can measure the belts and throw them on was just curious to see if anyone had already done it and found a good solution

Ok fair enough. I'd pull mine out if I could get a belt that fit

Its gonna be a stretch fit belt ill get the exact number off my motor later

The belt that you need is part # 25-030250SF

It's 336-4 or 337-4 go to orallys they have the belt size you need.i went to autozone nine times and they gave me the wrong belt nine times also ...