Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Rod knock on my VE - options

+ Reply To Thread
Posts: 31-39 of 39
2014-02-22 15:00:24
#31
It's a forum, no room for reading, logic, or being considerate of other peoples situation.
2014-02-23 06:06:34
#32
Very nice car...
2014-02-24 02:40:35
#33
Rod knock on my VE - options
every opinion is welcome, that's why I published it here

have some news, here a picture of the bearings
2014-02-24 18:20:06
#34
At least one looks good. How does the crank look? My guess is it will need machining to make it correct, maybe get a way with a heavy polish.
2014-02-24 19:03:21
#35
Originally Posted by squirlz
At least one looks good. How does the crank look? My guess is it will need machining to make it correct, maybe get a way with a heavy polish.


the crank was looking good, just some minor scratches, we are going with a heavy polish so I can have a functional car while I decide which way to go.
2014-02-25 12:18:34
#36
Sell the Kelfords cams and/or the 20v header or sell the entire head and go for a 20v and let it stock for a couple of months, it's almost the same amount of money Nico, and a good upgrade for PrimerĂ­n.

Go 20v!.
2014-02-25 14:01:10
#37
Rod knock on my VE - options
bad news, found why bearing were spun, bent rod.

AFAIK a bent rod means detonation (I've never heard detonation in this setup, so unlikely) or maybe a kind of hydro lock due to excess oil in combustion chamber.

I say this because spark plug on the same cylinder came out wet and there is an oil leak beside the exhaust port and the header collector, see picture bellow.

Last edited by Nicoxis on 2014-02-25 at 14-02-20.
2014-02-25 14:24:36
#38
Dont polish the crank too much without measuring the journal because you can get out of spec. easy!!
2014-02-25 14:43:49
#39
Originally Posted by Payu
Dont polish the crank too much without measuring the journal because you can get out of spec. easy!!


thanks Payu, the scratches were mostly superficial, so they went away with a light polish. Good to know though.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top