Thread: Center feed SR20VE intake manifold design

would be kinda cool to flip it around so the throttle body was poking out the hood

^Exactly. It seems to be working good on Mike Cody's H series hatch. His actual throttle body is outside of the hood facing forward though.

Removed to free up space for more non-technical drama.

I will be buying one for my white B13.

It will be a NA/nitrous whore for now until boost time.

if the price is around what you say im in. this will take the game to a whole new level

I have no doubt this will make good power ask me how I know, on a side note there should be no more complains about parts being available for our cars to make power you got to pay to play unless your fabbing your own sh!t.

How do you know?

i have proven that the injectors from the underside, will lose your 10hp. through the full range

and who said itb's are the best? my setup only makes 135whp.




- - - Updated - - -

damm quoted the wrong person

You wont loose power as long as the injectors are positioned properly. Look at the n1 just for an example.

Of course if they're further away from the valve you could loose some down low and/or some drivability but who's really worried about that with a big centerfeed Plenum.

do you know? This plenum design has been proven on k series and before we get into the whole debate bullshit i know jamie and the fabricator are very knowledgeable and wouldnt waster their or our time on something that wont perform.

I will be the first to try it just to say told ya so