Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Kelford sr20ve 184-e Camshafts - anyone have results?

+ Reply To Thread
Posts: 31-36 of 36
2014-01-28 17:17:01
#31
immigymp why don't you buy a set and test them out. 2.5 months and you could have solved this problem already.
2014-01-29 10:05:52
#32
Waiting on parts from America....plus already have 20v/n1 cams
2014-01-29 21:24:31
#33
Your in luck, kelfords isn't an American company.
2014-01-30 13:59:57
#34
According to someone who tested them with better luck than us the best combination its 184-E IN 184-C EX for max power!!
You can order them like that but would be a special order!!! so order them by now!! So they get to your hands 5 weeks later
Again as far as Iknow the only persons with hands on experience on these cams are us and the other person jejejeje
2014-02-02 04:54:00
#35
Originally Posted by immigymp
Waiting on parts from America....plus already have 20v/n1 cams


question immigymp how are those 20v/n1 cams
2014-02-02 05:36:17
#36
Originally Posted by enoehttemi
Originally Posted by immigymp
Waiting on parts from America....plus already have 20v/n1 cams


question immigymp how are those 20v/n1 cams


The center lines are slightly off, make sure you degree them. As you'd expect they make N1 power on the low lobe and a little more power down low than the N1s... a good street cam but not worth the effort vs regular N1s.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top