Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: SR20VE Into P10 Hose Question

+ Reply To Thread
Posts: 1-5 of 5
2013-10-12 22:25:06
#1
SR20VE Into P10 Hose Question
I'm working on my SR20VE swap for my P10. I want to replace all of the hoses that are connected to the heater pipes so I don't need to worry about them later on. Anyone know where I can get some P/N's for those hoses? I'm pretty sure the big angled short hose and the one that connects the two metal pipes together (near the thermostat housing) are the same as the P11/B15 roller rocker engines, but the rest I'm not too sure of.
2013-10-13 00:15:41
#2
all you gotta do is use a straight piece of heater hose for the lower heater core fitting to the fitting on the cylinder head.
then purchase yourself one other hose with a pre bent 90 and cut to fit.

good luck!

http://www.sr20-forum.com/vvl/11650-hose-remember-vvl.html
2013-10-13 02:21:23
#3
I've seen that thread. I'm not talking about the heater hoses, but the hoses on the bypass pipes on the intake side of the block.
2013-10-15 17:26:38
#4
greg @ gspec will get them for ya
2013-10-15 19:32:48
#5
I've found US numbers for all but one hose now through hours of research and a little help from someone overseas, lol.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top