Thread: Cam Angle Sensor made from a obd2 distributor

Hey there, I saw an old thread of a guy that made a CAS out of an obd2 distributor, either vvl or de. What he did was to get rid of the coil, flattened the dizzy housing and shortened the shaft in order to reuse the optical sensor and the disc retainers. I attempted to make my own and succeeded making a working unit. Here are some pictures of it any questions or comments are welcome.

Make me one lol. What ecu setup are you running??

I will most likely gonna use microtech. Send me a pm if you want one.

Great work by the way have you tested it out yet?

Yes I tested it by plugging it to my P10 with an obd2 scanner hooked up and was I able to see the cam angle output signal and fuel injectors output signals as well. Also, I could hear the injectors opening and closing, so yeah it basically works.

That's some cool stuff. Good job. Lmk how it performs

Im willing to let someone in the vecinity to test it in a running car.

Nice work looks real clean. Great opportunity for you to make and sell these

I would like to test it first on someones car with a COP setup in order for me to start making them.

great work! looks thinner than a 20v CAS. hope with all that work its still cheaper also.