Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: TPS after VE swap

+ Reply To Thread
Posts: 21-29 of 29
2013-09-11 01:39:28
#21
Originally Posted by cortrim1
Originally Posted by circa.13
What would cause my tps plug to still read 2.2 even with it completely unplugged from the actual plug?


put a stock ecu in the car and see if it changes. here is a tps adjustment guide.

SR20 Setup Tips

Aww my stock ecu is being controlled by mothership Nemu
Last edited by circa.13 on 2013-09-11 at 01-40-35.
2013-09-11 01:43:24
#22
even better, just plug another tps in an u can move the little thing on it to test it out an see what it says in nismotronic..
2013-09-17 02:26:10
#23
Originally Posted by lynchfourtwenty
even better, just plug another tps in an u can move the little thing on it to test it out an see what it says in nismotronic..


Vader is finally reading tps voltage. .33 closed and 4.17 at wot
2013-09-17 02:42:24
#24
What was the problem? The sensor?
2013-09-17 02:46:55
#25
Probably. The VE double TPS wasnt working.
2013-09-17 02:51:50
#26
Ya those suck
2013-09-17 03:51:41
#27
Now my car wont fire........

Sometime it will idle like normal but just gradually looses power and dies.
2013-09-17 04:13:29
#28
now adjust the IACV
2013-09-17 04:44:19
#29
I am a dope! The car was to low on gas to turn over. Shes all good now now I can really time it the right way.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top